New
#1
BSOD after Windows Logo
Hi
I bought a new PC case and have fitted everything from the old case to the new case (No new hardware, just a straight swap). All plugged in and wired up etc but seem to be having a problem booting to my SSD.
Boot up PC and BIOS recognizes the SSD. Then it tries to boot into Windows and comes up with an error screen saying Windows Failed to Boot, would you like to do a startup repair, I say yes and let it do its thing, it restarts and tries to boot into Windows, gets as far as the logo screen and then BSOD with the following error:
"A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. if this screen appears again follow these steps:
Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your had drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer
*** STOP: 0X0000007B (0XFFFFF880009A9928, 0XFFFFFFFFC0000034, 0X0000000000000000, 0X0000000000000000)"
Ran Seatools long and short tests and they both passed.
Booted into windows on another harddrive and ran Error Checking Check Disk and select both "Automatically fix file system errors and Scan for and attempt recovery of bad sectors, came up with errors and fixed them and still coming up with BSOD
I've got 2 other hard dries (1 bootable) and have managed to boot into windows with it and it works perfectly. I've got Hirens Boot CD and have attempted at running Check Disk but the F drive (SSD) is read protected and so is unable to. Not really sure where to go from here really.
Got a ASUS M5A99X EVO Motherboard if that makes a difference?
Last edited by jkility; 23 Jul 2014 at 14:48.