Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Webcam undetected, is Unknown Device in Computer Management

18 Nov 2014   #11

Windows 7 Home Premium 64bit

Thanks for the link townsbg,
Over breakfast this morning I realised that I should re-search and possibly even start a new thread, because the parameters on this issue have moved significantly.

This post needs to remain as a path for others to follow.
But in essence I now have a different problem

- I now have the Webcam listing in Device Manager
- Code 10 Error has appeared and is the foremost issue.

I'll follow the process in your link.
It is similar to what I've been doing, but sometimes the devil is in the detail, and no more so than with computers. Chasing some of those related links too.
My System SpecsSystem Spec

Thread Tools

Similar help and support threads
Thread Forum
Webcam suddenly doesn't work, listed as unknown device.
Possible solution: reset bios by clearing cmos. Take battery out and hold down power button. put battery back, plug in power, hold down power button 10 seconds and release. Problem: Laptop built in webcam suddenly listed as unknown device in device manager. Uninstall, reboot, detect...
Hardware & Devices
Code 43 Unknown Device for USB connected Logitech C920 webcam
I have been using a logitech C920 webcam for months on this laptop. Yesterday, I plugged it in and got an unknown device message. I reloaded the logitech software from their site. No change. I plugged the webcam into another laptop and it was recognized. I have tried a basic "clearing"...
Hardware & Devices
Unknown device in device manager after Bios default settings are
applied. Sorry that last word didn't get in the subject line. So: These two values are: USB\VID_0CF3&PID_3000&REV_0200 USB\VID_0CF3&PID_3000
Built-In Webcam Not Working - "Unknown Device" USB Code 43
Hello, I have looked over many, many other forums and threads regarding this issue, but to no avail, have not been able to solve my problem. I'm starting to think that some hardware that communicates with my Webcam could be damaged - but I have not given up hope that this could be solved...
Hardware & Devices
base system device, video controller and unknown device missing
hie i have just installed window 7 and this devices are missing, any help will be very much appreciated. base system device device id PCI\VEN_1217&DEV_7110&SUBSYS_117C10&PEV_00 PCI\VEN_1217&DEV_7110&SUBSYS_117C10CF PCI\VEN_1217&DEV_7110&CC_088000 PCI\VEN_1217&DEV_7110&CC_0880 UNKNOWN...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 05:06.
Twitter Facebook