DVD/CD ROM Unable to read disks. BIOS set up problem?


  1. InTheCity
    Posts : 11
    Windows 7 Ultimate x32
       New #1

    DVD/CD ROM Unable to read disks. BIOS set up problem?


    Hello there,

    The main problem I’m having is my DVD/CD ROM isn’t reading disks. I’ve tried multiple disks. There is power to the drive and it does attempt to read the disk however it cannot.

    My computer does recognize the drive and show it in my computer. There is no problems according to device manager and the drivers seem to be up to date.

    I don’t have any filters to delete in the registry like some help pages have suggested.

    I have recently replaced my BIOS battery and I do get a missing floppy drive error at start up (I don’t have a floppy disk drive). Could it be that the BIOS settings have been set to default and that’s why the CD/DVD ROM drive isn’t been recognized?

    I’m just looking for a way to diagnose or fix DVD Drive. Any help would be greatly appreciated.

    Thanks,

    Nick
      My Computer
    Quote Quote

  3. fireberd
    Posts : 8,135
    Windows 10 64 bit
       New #2

    Dell BIOS, when reset on older systems will show the Floppy drive error. You have to disable that in the BIOS. Otherwise your problem is probably a defective drive, especially considering this is a 2008 machine.

    The Dell manual doesn't detail exactly what type of interface you have on that drive (SATA or PATA/IDE). Most new drives are SATA and if you have the SATA data and power connectors that is the type to get. New drives are both ROM drives and Burner drives and relatively inexpensive (many under $25). Check www.newegg.com
      My Computer
    Quote Quote

  4. InTheCity
    Posts : 11
    Windows 7 Ultimate x32
    Thread Starter
       New #3

    Thanks firebird!
      My Computer
    Quote Quote

 

  Related Discussions
Recently my DVD drive has been doing something weird. When i insert a CD of any type, it works fine, when i insert a DVD which is not an RW, it works fine, but when i insert a DVD-RW, it does its normal loading sound, some cracking and then does a very weird noise, and i hear some spinning, and the...
hi guys, something really odd happened yesterday.... Burner working overall ok - had a dirty lens the other day - cleaned and was working well.. Yesterday I tried windows' burn function, which I never tried, and there's an option where you can use the disk like a hard disk, or sort of... I...
When I tried to burn images to disk earlier today using FreeStudio Free Disk Burner my DVD RW drive started making strange pulsating griding noises. Now it can't read disks. It can open and close by pressing the button and by via windows too but can't read or write any more. Is it dead or is...
hi, my dvd drive wont read any disks, im running windows 7 64 bit, i have tried the options below but still no luck, any help would be much appreciated as it has me puzzled now! i have had a search on here and tried this to fix it: - execute regedit - search the key...
DVD Drive doesnt read disks
in Hardware & Devices

I "upgraded" from Windows XP last week, and ever since i installed it, my cd/dvd drive refuses to read any disks. I have tried at leas 5 different disks (2 DVDs, 3 CDs), and none of them work. All I hear is the drive spinning the disk (doesnt sound like it normally does) for about 10 minutes. It...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 21:57.
Find Us