Unable to fin the XMP profile on my BIOS..

On the left hand side it says AMD Smart Profiles ... What happens when you click on that ? ...

These are my options, when I clikc "add" it wants to open up a file.

This is proving to be quiet difficult ... Have found some thing else how ever ...


AnandTech | Memory Scaling on Haswell CPU, IGP and dGPU: DDR3-1333 to DDR3-3000 Tested with G.Skill

In Addition to the above


The ASUS M5A78L-M/USB3 does support all of the current FX CPU's, IF the BIOS is 0411 or higher if not it won't boot. Next, the FX CPU's IMC is rated stock for DDR3-1866 IF the RAM has a 'SPD' JEDEC of 933MHz, but not if the kit's 933MHz is XMP. If using XMP kits the RAM runs at the highest available non-XMP up to 933MHz (DDR3-1866). To correct this the RAM must be manually set in the BIOS.

but the real issue is that I do not get any of these options, like that "dram" profile I do not get. .

I think the answer is in the BIOS you have to configure the Ram Manually

Ah ok I get you know my friend, I am able to see alot of options for the RAM want me to send a picture? thanks again fro all the amazing help :)!

Sure Post some screenshots ... There are pictures in the Manual but they are just to small for me to see ...

All these settings here are the same settings on my BIOS. :))

Reading through the Manual only some Settings are adjustable the rest has to be done through the BIOS ...

Post a screenshot of the Clock Voltage Settings ...



http://sites.amd.com/us/Documents/AM...ning_Guide.pdf