Question about USB 2.0 and 3.0 cables

Page 1 of 2 12 LastLast

  1. hummer7
    Posts : 85
    Windows 7
       New #1

    Question about USB 2.0 and 3.0 cables


    I have several USB 2.0 and USB 3.0 portables wihich came with USB 2.0 and USB 3.0 cables respectively.
    One of my recent computer tower has both USB 2.0 and USB 3.0 ports.
    I understand that USB 3.0 and 2.0 cables are compatible with either USB 2 or USB 3 ports.

    My question is about the speed of file transfer and other functions when USB 2.0 cable (with portable drive with USB 2.0 port) is plugged into USB 3.0 ports in the tower , and vice versa (USB3.0 cable to USB 2.0 port).
      My Computer
    Quote Quote

  3. DMHolt57
    Posts : 1,618
    Win7 Home Premium x64 W10Pro&Home
       New #2

    The cables are not any different, a wire is a wire, connectors are same.
      My Computer
    Quote Quote

  4. whs
    Posts : 26,210
    Vista, Windows7, Mint Mate, Zorin, Windows 8
       New #3

    A USB2 device will always run at USB2 speeds - even when attached to a USB3 port.
      My Computer
    Quote Quote

  6. hummer7
    Posts : 85
    Windows 7
    Thread Starter
       New #4

    OK. If USB 3.0 devices are connected to USB 2.0 port, how speed goes?
      My Computer
    Quote Quote

  7. whs
    Posts : 26,210
    Vista, Windows7, Mint Mate, Zorin, Windows 8
       New #5

    USB 3.0 - Wikipedia, the free encyclopedia
      My Computer
    Quote Quote

  8. Lady Fitzgerald
    Posts : 9,600
    Win 7 Ultimate 64 bit
       New #6

    hummer7 said:
    OK. If USB 3.0 devices are connected to USB 2.0 port, how speed goes?
    Any device will run no faster than it is designed to be and no faster than the port it is plugged into. In your example, the USB 3.0 device will run no faster than the USB 2.0 port does.

    Something to keep in mind about USB speed standards that they are a range. For example, USB 3.0 is basically any speed that is faster than USB 2.0 up to 5.0 Gbps. An inexpensive USB 3.0 device may not run much faster than a high priced USB 2.0 devices.

    Also keep in mind that not all USB ports will run at maximum speed for the standard nor be able to provide the maximum amount of power for the standard.
      My Computer
    Quote Quote

  10. pbcopter
    Posts : 1,872
    Windows 10 Pro x64, Windows 8.1 Pro x64, Windows 7 Ultimate x64 SP1,
       New #7

    DMHolt57 said:
    The cables are not any different, a wire is a wire, connectors are same.
    The cables are different in that USB 3.0 has more wires and thus more pins on the connector.

    They are arranged to provide compatibility with USB 2.0

    See the link that whs provided.
      My Computer
    Quote Quote

  11. alphanumeric
    Posts : 4,466
    Windows 10 Education 64 bit
       New #8

    The USB 3.0 cables that came with my external drive enclosures don't look like any USB 2 cable I've ever seen. Not the end that plugs into the device anyway. The other end that plugs into the PC looks the same but has extra pins in it.

    Keep in mind that even though a device advertises as being USB 3.0 compatible, that doesn't mean it will run at full USB 3.0 speed. My USB 3.0 drive enclosures have 5400 RPM laptop drives in them. They won't even reach full USB 2.0 speeds. I'd have to put an SSD in them to even come close to USB 3.0 speeds.
      My Computer
    Quote Quote

  12. whs
    Posts : 26,210
    Vista, Windows7, Mint Mate, Zorin, Windows 8
       New #9

    Plus there is another problem. The USB3 controllers seem to 'eat' a lot of the 5Mbps. In a series of tests I made, the eSata port was faster than the USB3 port using the same devices - the eSata port is rated at only 3Mbps.

    SSHD - Performance comparison with HDD and SSD
      My Computer
    Quote Quote

  13. LMiller7
    Posts : 2,497
    Windows 7 Pro 64 bit
       New #10

    The USB port, cable, end device, plus any intermediate USB devices such as a hub, effectively form a chain. And as is well known the strength of a chain is determined by that of the weakest link. The same principle applies to many aspects of computer performance. If any of the links in the chain are designed only for USB 2, that is the weakest link and will determine transfer speed. The performance characteristics of the stronger links in the chain don't matter. If any device is substandard in quality or operating under adverse conditions it may further reduce performance.

    To obtain full USB 3 performance everything in the chain must be of good quality and designed for USB 3.
      My Computer
    Quote Quote

 
Page 1 of 2 12 LastLast

  Related Discussions
Braided Cables Help
in PC Custom Builds and Overclocking

If you have seen my recent post I am building a new computer. I was recommend braided cables and I have fell in love with some. Those being: BitFenix Essentials Pro Pack - ATX 24pin, EPS 8pin, 2x PCI-E 6pin Set - Red/Black Products Model: BFA-PROPACK1-RD-BK : Performance-PCs.com, ... sleeve it and...
What do these cables do?
in Network & Sharing

Hi, I'm hoping someone can help me understand this as I don't to a lot of physical network setup. It all seemed obvious until this point. :confused: A customer has asked me to fill his pre-cabled (by BT) office with computers but there is one ethernet port that did not work whereas all the...
monitor cables -DVI
in Hardware & Devices

What is the difference between dual link DVI and single link DVI cables? Would I see a noticeable difference if I switch to dual link cables? Would I benefit any at all from switching from single link to dual link?
Sata 3 Cables
in Hardware & Devices

I know that there is really no difference between a SATA 1 and SATA 2 cable, despite the fact that some vendors try to give that impression. However,the new Asus Asus M4A89GTD motherboard includes two pairs of cables, 2 x SATA 2 & 2 SATA 3. The only difference that I can see in them, is one pair...
Question about case cables
in PC Custom Builds and Overclocking

When you but a case, it comes with cables linking from the ports & the startup/shutdown button, but I don't know whether it will connect to my motherboard. Are all the cables the same type?
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 09:02.
Find Us