Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: PC doesn't seem to read mouse input correctly

31 Dec 2014   #11
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64

How to post a picture in this forum. Many of us don't like going off site to see things.

Tutorial by Brink:
Screenshots and Files - Upload and Post in Seven Forums

My System SpecsSystem Spec
31 Dec 2014   #12

Windows 7 Home Premium 64 bit

Quote   Quote: Originally Posted by mike009 View Post
Direct Input Mouse Rate
Changing USB Polling Rate to 1000hz (or lower) | TechPowerUp Forums
wonder what polling rate you are getting from your mouse - this would be controlled by HIDUSBF.sys and might affect all your USB mouse devices
Hey Mike,

thanks for the reply I am trying this now, I haven't thought about this too much before so hopefully it's a winner :)
My System SpecsSystem Spec

 PC doesn't seem to read mouse input correctly

Thread Tools

Similar help and support threads
Thread Forum
Is my HD in the right place and configured/being read correctly?
Not sure about my title. Recently I replaced my older normal hard drive for an SSD (Samsung EVO840). Because I could not place it directly on my motherboard I is hooked via a PCIe card. 2 things came about: -1- On my Windows taskbar bottom right corner I have it listed as a drive I can actually...
Hardware & Devices
How to correctly import certificate key to read encrypted XP files
Was unable to access my encrypted XP data files after clean installing W7 onto the same machine. Fortunately found a certificate key on an old backup. Don't want to mess this up again so looked at certmgr and am unclear as to where to import the key to?? There's lots of info on how to encrypt...
General Discussion
CPU-Z doesn't read my CPU frequency correctly!
Hi!I want to know why CPU-Z(1.68) doesn't read my cpu freq. correctly.I checked in my BIOS and it says as usual 3200 Mhz but CPU-Z says 1319 Mhz. Thanks for reading or reply.
Hardware & Devices
Mouse input not recognized
Hi, I'm using the (painfully slow) keyboard to use my cursor as my computer disconnected my USB mouse when I woke up the computer a couple of days ago and hasn't accepted mouse input since. This particular mouse works fine on my laptop, as do the other two (wireless) mice that I tested. My wacom...
Hardware & Devices
Prototype doesn't install correctly?
Hi! I'm running Windows 7 Build 7100- Prototype says that it installed correctly, but whenever I press the Play button, it just closes and nothing happens. I ran all the files in the CD in Compatability mode for Vista (Service Pack 3), installed and then removed it twice, and restarted after...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:11.
Twitter Facebook Google+