New
#1
use 27" (2560 x 1440) on board with 1920x1200)
I have the ASROCK H77M and want to buy a 27" monitor with 2560x1440 resolution.
the specs show on DVI/HDMI it only can support 1920x1200. My only high-resolution option seems to be the analog (D-sub) port where the board lists 2048x1536 as the max. resolution.
currently i have 2 monitors on it (24" 1920 x 1080 on DVI and 19"on on sub-D) on DVI. that 19"monitor would go away and i plan to use the 24"and the 27". now the way i see it i would have to hook up the 27"monitor via D-sub:
- will the picture quality be bad?
Ideally I don't buy a graphics card.... unless that is my only option to get good picture quality at high res. i don't do any graphics application that would require more then the Intel on-chip graphics.
i haven't researched much if some boards with on-board graphics (on Intel CPU) would allow monitors with higher resolution vie HDMI.