how to configure windows 7 Pro to utilize maximum memory

Layback Bear said:

From your post # 5

Attachment 353187

Paged, Non paged and processes are extremely high.

Example:
My system now.

Paged = 159
Non paged = 43
Processes = 45

What does that mean?

167 processes.

I've never seen anyone with more processes running.

How many of your running services are non-Microsoft?

You may have performance issues not directly related to RAM--I don't know since your complaints are about RAM usage, not performance.

Layback Bear said:

I will say it again.
In my opinion you, me or anybody else is not going to out smart Windows 7 when it comes to memory. Leave it at default and enjoy it.
I have more ram than I need at this time. Oh well. If Windows 7 wants or need to use more ram it will do so without me doing anything.

I had 32 gigs of ram on this system and now I down to 16 gigs installed.

Point taken :)

But what is going on with my "Paged, Non paged and processes"?

ignatzatsonic said:

167 processes.

I've never seen anyone with more processes running.

How many of your running services are non-Microsoft?

You may have performance issues not directly related to RAM--I don't know since your complaints are about RAM usage, not performance.

OS is snappy not having performance problems just always looking for more. Chrome was maxing out the 6GB Mem I used to have. adding the 12 GB solved that problem. I thought windows would grab more of the new memory.

There is a misconception here. The memory usage graph does not account for all memory usage. It was never intended that it would. If you look at the Resource Monitor memory tab you will see a substantial amount of memory shown as "Standby". This memory is very much in use as a kind of cache and contributes substantially to good performance. All memory except that labeled as "Free" is in use. If Standby memory was included in the graph many systems would show near 100% usage most of the time and that would be neither interesting nor useful.

But with 18 GB RAM you must face the fact that much of the time you will have substantial amounts of RAM that is Free and unused. With a relatively light workload there is simply no way that such large amounts of memory can be put to efficient use at all times.

Microsoft has devoted an enormous amount of effort to the system memory manager to make it use whatever memory resources are available to the fullest possible extent. Within reasonable limits adding memory will improve performance. But there will always be a point of diminishing returns beyond which more memory does little to nothing. With 18 GB I expect you are well past that point. With typical workloads that limit is roughly 8 GB on a 64 bit OS. Of course there are exceptions, such as when running virtual machines or when the workload is very high.

The suggestion in post #4 is not useful in such cases and will accomplish the exact opposite of what you want. The purpose of the option is to restrict memory availability for testing and diagnostic purposes. It will in no way force the OS to make more efficient use of memory.

If you post the screenshots suggested in post #2 it will be possible to more fully explain the situation.

Edit: After seeing the screenshots it appears that all but 1926 MB of RAM is actually in use. With 18 GB RAM I would consider this very good. Any attempt at manipulating this is unlikely to be productive and may well impair performance.

LMiller7 said:

There is a misconception here. The memory usage graph does not account for all memory usage. It was never intended that it would. If you look at the Resource Monitor memory tab you will see a substantial amount of memory shown as "Standby". This memory is very much in use as a kind of cache and contributes substantially to good performance. All memory except that labeled as "Free" is in use. If Standby memory was included in the graph many systems would show near 100% usage most of the time and that would be neither interesting nor useful.

But with 18 GB RAM you must face the fact that much of the time you will have substantial amounts of RAM that is Free and unused. With a relatively light workload there is simply no way that such large amounts of memory can be put to efficient use at all times.

Microsoft has devoted an enormous amount of effort to the system memory manager to make it use whatever memory resources are available to the fullest possible extent. Within reasonable limits adding memory will improve performance. But there will always be a point of diminishing returns beyond which more memory does little to nothing. With 18 GB I expect you are well past that point. With typical workloads that limit is roughly 8 GB on a 64 bit OS. Of course there are exceptions, such as when running virtual machines or when the workload is very high.

The suggestion in post #4 is not useful in such cases and will accomplish the exact opposite of what you want. The purpose of the option is to restrict memory availability for testing and diagnostic purposes. It will in no way force the OS to make more efficient use of memory.

If you post the screenshots suggested in post #2 it will be possible to more fully explain the situation.

Thank you for LMiller7 for the detailed explanation. I feel better knowing over 9GB is on standby. I did post screen shots on post #5. Perhaps I need to leave setting as they are. I'd rather have the extra memory in my Rig than sitting in a drawer :)

LMiller7 said:

There is a misconception here. The memory usage graph does not account for all memory usage. It was never intended that it would. If you look at the Resource Monitor memory tab you will see a substantial amount of memory shown as "Standby". This memory is very much in use as a kind of cache and contributes substantially to good performance. All memory except that labeled as "Free" is in use. If Standby memory was included in the graph many systems would show near 100% usage most of the time and that would be neither interesting nor useful.

But with 18 GB RAM you must face the fact that much of the time you will have substantial amounts of RAM that is Free and unused. With a relatively light workload there is simply no way that such large amounts of memory can be put to efficient use at all times.

Microsoft has devoted an enormous amount of effort to the system memory manager to make it use whatever memory resources are available to the fullest possible extent. Within reasonable limits adding memory will improve performance. But there will always be a point of diminishing returns beyond which more memory does little to nothing. With 18 GB I expect you are well past that point. With typical workloads that limit is roughly 8 GB on a 64 bit OS. Of course there are exceptions, such as when running virtual machines or when the workload is very high.

The suggestion in post #4 is not useful in such cases and will accomplish the exact opposite of what you want. The purpose of the option is to restrict memory availability for testing and diagnostic purposes. It will in no way force the OS to make more efficient use of memory.

If you post the screenshots suggested in post #2 it will be possible to more fully explain the situation.

Edit: After seeing the screenshots it appears that all but 1926 MB of RAM is actually in use. With 18 GB RAM I would consider this very good. Any attempt at manipulating this is unlikely to be productive and may well impair performance.

Sounds like good advice :) P.S. I ran Ubuntu and Win 10 virtual machines simoultaneously and used 90% of the memory "in use" so I guess I don't have any thing to complain about :)