hello sevenforums,
was looking at getting this product Hotway 4-Bay non-RAID USB3.0/eSATA Enclosure
4-BAY ENCLOSURE
anyway i was just having a look at replacement fans if i decided to change it but the measurements are 80 x 80 x 20 mm and most the 80 mm fans are 80 x 80 x 25 mm :S
does...
Hi guys.
I received 3/4 of my new hardware yesterday. So, today, I decided to unpack my (huge) case to check out how will connect everything and also learn to "play" with it.
So, the case has 4 fans (Lian-Li Lancool PC-K62) with 3 pins. According to my motherboard manual, there are 3 system...
I have got a pc tower which only has a fan up at the top and at the back????????? The psu is up near the top as well.
My mates used to have the back set as intake and the top as exhaust and got better temps, i tried it and the temps are in the 38% and hwen i ran a couple of programs i ened up...
ok so i need input
i have 4 fan connecters on my mother board
CPU Fan - 4 pin
Pwr Fan - 3 pin
Sys Fan 1 - 3 pin - Un-used
Sys Fan 2 - 4 pin
its a gigabyte MB that comes with easytune which lets me keep CPU fan at 100%
ok so this is the deal