HDD check?

Chkdsk was executed in read-only mode on a volume snapshot.

Checking file system on C:

CHKDSK is verifying files (stage 1 of 3)...
148736 file records processed. File verification completed.
1186 large file records processed. 0 bad file records processed. 2 EA records processed. 47 reparse records processed. CHKDSK is verifying indexes (stage 2 of 3)...
181772 index entries processed. Index verification completed.


CHKDSK is verifying security descriptors (stage 3 of 3)...
148736 file SDs/SIDs processed. Cleaning up 6 unused index entries from index $SII of file 0x9.
Cleaning up 6 unused index entries from index $SDH of file 0x9.
Cleaning up 6 unused security descriptors.
Security descriptor verification completed.
16519 data files processed. CHKDSK is verifying Usn Journal...
33746176 USN bytes processed. Usn Journal verification completed.
Windows has checked the file system and found no problems.

104755199 KB total disk space.
23979932 KB in 71407 files.
47336 KB in 16520 indexes.
252159 KB in use by the system.
65536 KB occupied by the log file.
80475772 KB available on disk.

4096 bytes in each allocation unit.
26188799 total allocation units on disk.
20118943 allocation units available on disk.

There are 2 screen shots that I posted......one with Winnit and other with CHDSK source.

I dont know which is the one with chkdsk/ r?

Thanks.

The first test was the /R. The question is whether those minor errors tripped Dell's disk error. Can you run the Dell test again, either through the BIOS or a Windows program? If so and it comes out clean, you're probably done. If not, I would go ahead to the Long self-test. Actually I would do that in any case.

paul1149 said:

The first test was the /R. The question is whether those minor errors tripped Dell's disk error. Can you run the Dell test again, either through the BIOS or a Windows program? If so and it comes out clean, you're probably done. If not, I would go ahead to the Long self-test. Actually I would do that in any case.

Frankly, I don't have the know how to do the test through BIOS.

I can do the long one if you post the command.......and where would the results be located now?

Thanks.

Dell test results weren't detailed just "partition C corrupted."

You would have to go into the BIOS (F2 at the first Dell boot screen) and see if there's a Utilities tab from which you can launch a Disk Test.

The Long test is a function of third party software, such as Gsmartcontrol or seatools.

From where can I download those tools and which do you prefer?

Thanks.

Short test results using GSmart control for windows:

smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7-sp1] (sf-5.43-1)
Copyright (C) 2002-12 by Bruce Allen, smartmontools

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Black
Device Model: WDC WD3200BEKT-75PVMT1
Serial Number: WD-WX51A9221461
LU WWN Device Id: 5 0014ee 6ad9bea49
Firmware Version: 01.01A01
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon May 04 02:35:44 2015 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6360) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 66) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 162 157 021 Pre-fail Always - 891
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 300
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 179
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 300
191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 282
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 95
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1816
194 Temperature_Celsius 0x0022 107 097 000 Old_age Always - 36
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
240 Head_Flying_Hours 0x0032 100 100 000 Old_age Always - 168
241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 988490962
242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 2104881779
254 Free_Fall_Sensor 0x0032 200 200 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 179 -
# 2 Short offline Completed without error 00% 175 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Running extended test 66 mins shall post results.

Results of short test of my other WD Blue HDD for your expert views:


smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7-sp1] (sf-5.43-1)
Copyright (C) 2002-12 by Bruce Allen, smartmontools

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue Serial ATA
Device Model: WDC WD3200AAKS-00L9A0
Serial Number: WD-WCAV2K841553
LU WWN Device Id: 5 0014ee 1ad31e449
Firmware Version: 01.03E01
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon May 04 03:21:23 2015 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5760) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 70) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 137 133 021 Pre-fail Always - 4116
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3861
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 9055
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3851
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 672
193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 3861
194 Temperature_Celsius 0x0022 109 090 000 Old_age Always - 34
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 9055 -
# 2 Short offline Completed without error 00% 787 -
# 3 Short offline Completed without error 00% 149 -
# 4 Short offline Completed without error 00% 117 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.