Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Replacing C drive in Dell Optiplex 980, bus speed question

28 May 2015   #1

Windows 7 Pro 64bit
Replacing C drive in Dell Optiplex 980, bus speed question

Question is about a Dell 980 Optiplex computer running Windows 7 Pro.
The C drive has failed. All I want to know is :
- The bus speed for the SATA drive in the Dell service manual says 1.5gb and 3.0 gb/s
- I purchased a Western Digital Blue WD10EZEX 1TB 7200 rpt 64mb cache SATA 6.0Gb/s internal drive.

What problems would I experience if I install this WD drive into the Dell?
What needs to be done to enable a 6.0Gb/s drive to work with a computer having a bus speed of 3.0Gb/s?

My System SpecsSystem Spec
28 May 2015   #2

Windows 7 Ultimate x64 SP1

You won't notice any speed issues using a 7200 rpm HDD on a SATA II (3 Gbps) port. Now, if you would get an SSD, you would see lower than advertised speeds - as an SSD nowadays is faster than SATA II.
My System SpecsSystem Spec
28 May 2015   #3

Windows 7 Pro x64 Windows 10 Pro x64

You won`t have any problems :)

You wanna run at 6 Gbps, you have to buy a 6gps sata card.

Not worth the time or money.

SYBA SD-PEX40049 Flex-2-port SATA III 6Gbps PCIe Card, Hard Drive Connectors can be set as External or Internal Ports by Jumpers -
My System SpecsSystem Spec

28 May 2015   #4
Mellon Head

Win 7 Pro x64/Win 10 Pro x64 dual boot

Just plug it in and go. The drive interface will run the drive data rate at half speed, which is fine. 6 GB/s is the max transfer speed for your new drive, but it can easily run at 3 GB/s with no harm to the drive at all.
My System SpecsSystem Spec
28 May 2015   #5

Windows 10 Pro/ Windows 10 Pro Insider

They are all interchangeable. It's a misnomer of a Mechanical Hard Drive running 6 Gb/s. There is no commercially available Mechanical hard drive that can break the sata 3 Gb/s barrier, much less 6 Gb/s. You will have no problems.
My System SpecsSystem Spec
30 May 2015   #6

Windows 7 Pro 64bit

Thank you all for prompt answers!
My System SpecsSystem Spec

 Replacing C drive in Dell Optiplex 980, bus speed question

Thread Tools

Similar help and support threads
Thread Forum
Replacing 160gb hard drive with 500gb in Optiplex 755 SFF
I am looking to replace the hard drive in my Dell Optiplex 755 SFF. It currently has a 160gb hard drive and I have been given a 500gb. Then I was going to put the 160gb in another computer I have, a Optiplex GX520. I can handle the physical side of it thru following a youtube video, it looks ok....
Hardware & Devices
Problems Cloning Hard Drive On A Dell 755 Optiplex Dt
Hello I have the Dell 755 OptiPlex large Tower. It had a small 250 Gb hard drive and I put a 1000 Gb hard drive in and loaded windows 7. The computer will not boot into the new hard drive, I have tried everything, including taking out the battery for a an hour or so, updating the bios to the A22...
Hardware & Devices
Question on Microsoft office 2010 before replacing hard drive.
Hello all, I will eventually be replacing the hard drive on my desktop. Microsoft office 2010 has been installed on my previous laptop which is no longer in my hands (Had gotten wiped out (hard drive ) before sending it out) and it has been installed on my current laptop and desktop. The desktop...
Microsoft Office
Dell Optiplex gx5200 question..
Just saw this machine in the shop going for 40 quid, with a 3Ghz processor, but completely forgot about the ram, would and could anybody tell me if it can handle up to 4gb?. Urgent as i need a computer for work. CHeers guys!
General Discussion
Dell Optiplex GX 280
Has anyone installed Windows 7 on a Dell Optiplex GX 280? I am trying to install and and I get as far as the initial "starting windows" where setup begins at, and I get STOP: c000021a {Fatal System Error} Anyone know what is wrong?
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:46.
Twitter Facebook Google+