Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Differences AHCI vs ACPI?

07 Jun 2015   #1
pstein

win7pro 64bit
 
 
Differences AHCI vs ACPI?

When reading some config recommendations always two different hardware features are mentioned:

AHCI and ACPI

What is the difference?
Both seem to be power-saving-related.

Is one for hard disks and the other for CPU only?

Is one in BIOS-only configurable the other from WinOS configurable?

Peter


My System SpecsSystem Spec
.
07 Jun 2015   #2
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

My System SpecsSystem Spec
Reply

 Differences AHCI vs ACPI?




Thread Tools




Similar help and support threads
Thread Forum
cloned C:, installed AHCI drivers, changed BIOS to AHCI, D:'s GPT gone
see second post. I have a 3TB drive D: for data formatted with GPT. Had BIOS OnChip SATA Type set as "RAID" "As SATA Type" from back in the day. When I took out the RAID, I forgot to change this to AHCI when I reformatted and got rid of RAID drives! Changing to "AHCI" "As SATA Type" as...
Installation & Setup
No AHCI option in BIOS, is my computer default in AHCI or IDE?
I bought a brand new SSD, installed it in Windows 7, and there is no option in my BIOS for the SATA controller (to switch between IDE and AHCI Mode). How do I determine whether my computer's sata controller is using IDE or AHCI? I want to make sure that my AHCI controller is enabled and not IDE...
Hardware & Devices
Differences in HDD
How do I know if I should be using a Sata, IDE or any of the others? Whats the difference in HDD's? Thanks
General Discussion
differences between these
Hello all Would like to know which is the best. GALAXY GTX 560 1GB TI MSI GTX560 Ti OC 1GB 1GB DDR5 ASUS GTX560Ti OC 1GB 1GB DDR5 MEMORY or which is the...
Graphic Cards
Intel Sata controler ICH10R AHCI + Jmicron AHCI error
Hi. I have the GA-EX58-Extreme Board and have just installed the pre release of Win7 7600 64 bit. Normally i have experience to get the BSOD when in staling with AHCI active in bios so i change to IDE mode. Installation went flawless and also the change to AHCI mode on Intel ICH10R controler...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:40.
Twitter Facebook Google+