Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: just installed win7. device mang. sees my ide hdd but nothe restofpc

26 Jul 2015   #1
bigjoncoop

winbdows 7 32bit
 
 
just installed win7. device mang. sees my ide hdd but nothe restofpc

hey fellaz.

i was running vista. i have on hdd thats sata and one thats ide. whe i installed win7 i ran into troucle. i had to disconnect the ide hdd and then the install went fine.

after win7 booted and everything is working fine. i reconnected my ide drive and my pc doesnt even recignize it. but if i go into device manager it shows up.

whats wrong?? thx


My System SpecsSystem Spec
.
26 Jul 2015   #2
GokAy

Windows 7 Ultimate x64 SP1
 
 

The IDE HDD may be dying. Or the cables going bad.

However, open Disk Management and see if it is recognized and has a drive letter assigned to it.
My System SpecsSystem Spec
Reply

 just installed win7. device mang. sees my ide hdd but nothe restofpc




Thread Tools




Similar help and support threads
Thread Forum
installed win7 and missing Ethernet controller and PCI device drivers
Anyone out there reading this i am at a loss for words. I recently reverted back to windows 7 on my notebook from Asus (n551jk) which has been causing me a tonne of problems with 8.1 . However since installing windows 7 i noticed that some drivers are missing and after searching on Asus driver...
Drivers
**Win 7 only sees 24 GB of 32 GB RAM installed..... help please.....
Hi all, I have recently built a new computer, everything had been working perfectly however the ammount of RAM windows displays has dropped from 32 GB to 24 GB, also during POST it displays 24 GB, whereas it had previously been showing the correct 32 GB... When I run CPU-Z and look at the...
Hardware & Devices
home premium sees only one cpu on dual cpu installed
I did a search for this problem and I only find from 2009 some answers. Only no one gives a solution to this problem. Someone posted a comparison chart for all the windows 7 flavors and it shows that home-premium can see 2 cpu's. Only mine does not. All other progs have seen the cpu's. I had to...
Hardware & Devices
Win7 HP only sees 1 physical proc ?
Hi, Three days ago I installed Win7 Home Premium on a clean new drive (unallocated space). Oddly, everything went smoothly. My original xp64 pro is on another drive (where it originally was), and upon booting, I am given the choice of which OS to use. I put antivirus on the Win7 sys, and...
Hardware & Devices
Not sure if Win7 sees SSD as SSD
Hi I just built a new machine w/ an Intel X-25M SSD as the primary OS drive. I know that you should not defrag and SSD. In defrag it says only drives that can be defragmented will be listed. Well my X-25M SSD is listed. So I thought I should check the driver. My driver box is the same as above....
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:43.
Twitter Facebook Google+