Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Usb code 10

19 Oct 2015   #41
Driver170

Windows 7 64 bit
 
 

To reconfirm, your audio device has class upper filter ksthunk and no lower filter listed, correct?


that is correct


My System SpecsSystem Spec
.
19 Oct 2015   #42
Driver170

Windows 7 64 bit
 
 

[IMG][/IMG]
My System SpecsSystem Spec
19 Oct 2015   #43
ComputerGeek

Desk 1: Win 7 Pro x32; Desk 2: Windows 10 x64
 
 

OK. In your DevMgr snapshot, Expand USB just to check new yellow icons there either.

Ughh. You're problem is tougher to figure out what's going on then i first guessed. Device Manager writes a trace file. Let's have a look at that too
1. Create a .zip file of C:\WINDOWS\inf\setupapi.dev.log. Attach to next post.

2. Delete the original file

3. Let things run. Try to notice machine clock time when problem clears up and again approx machine clock time when problem reappears. The create a new .zip of the new setupapi.dev.log and tell me the approx clock times when things were good and again when it broke.

Hoping to find more helpful info in there
My System SpecsSystem Spec
.

19 Oct 2015   #44
Driver170

Windows 7 64 bit
 
 

OK. In your DevMgr snapshot, Expand USB just to check new yellow icons there either.

all clear
My System SpecsSystem Spec
19 Oct 2015   #45
Driver170

Windows 7 64 bit
 
 

here we go


Attached Files
File Type: log setupapi.dev.log (62.9 KB, 2 views)
My System SpecsSystem Spec
19 Oct 2015   #46
Driver170

Windows 7 64 bit
 
 

2. Delete the original file

will i delete that log file
My System SpecsSystem Spec
19 Oct 2015   #47
Driver170

Windows 7 64 bit
 
 

If i disable my OC and return BIOS to default everything is fine :) i can reset my PC loads of times without issue. But when i enable my OC i get that error
My System SpecsSystem Spec
19 Oct 2015   #48
ComputerGeek

Desk 1: Win 7 Pro x32; Desk 2: Windows 10 x64
 
 

upload the new setup.api.log file windows built.

This is a tricky one. From what i have found
> ksthunk.sys is a filter only used on 64 bit machine
> I think it's used to interface to apps/modules that are 32 bit
> Googling ksthunk code 10 reveals a lot of forum posts from people with a variety of issues (BSODs as well) but not much in solutions

But we'll still take a look. Suggest you go back to Driver Details for the audio device
> Click on each module in the display to see its Provider and Version number
> Are they all from Microsoft? If not, who else Provdes?
> Also not the version and date of ksthunk. Just in case the process of reinstalling changes the version.
My System SpecsSystem Spec
19 Oct 2015   #49
ComputerGeek

Desk 1: Win 7 Pro x32; Desk 2: Windows 10 x64
 
 

Quote   Quote: Originally Posted by torchwood View Post
See that youve overclocked, according to your specs, thats more than likely the problem.

Roy
Accolades to torchwood for suggesting OC early on. I've never tried OC nor know much about it. I'm much more a "software kind-a-guy". So I'm curious how OC fits into the equation and could be causing these s/w issues if anyone(s) want to jump in with more info?


@Driver170
I don't want to hijack your thread.. but thought it might help all around to get a better idea of how OC could be part of your code 10 problem.
My System SpecsSystem Spec
19 Oct 2015   #50
Driver170

Windows 7 64 bit
 
 

Its the OC for sure no code 10 as yet with asus default :)

@Driver170
I don't want to hijack your thread.. but thought it might help all around to get a better idea of how OC could be part of your code 10 problem.

Well if i disable my OC and use default the error 10 code is gone!
My System SpecsSystem Spec
Reply

 Usb code 10




Thread Tools




Similar help and support threads
Thread Forum
Windows update errors found: code 80073712 & code 800B0100
Windows 7 pro updates got two error code. Please see attached updateerror1.png
Installation & Setup
Audio problem,Realtek AC97,Code 10,This device cannot start. (Code 10)
Basicaly the title explain it all,can find the driver for on board audio device. I just buy a second hand MBO.It is MSI Neo 4 H,MS-7125 Ver:3,Bios ver. V5.3 072106 Newly instaled Windovs 7 Ultima 64bits. Trayed few diferent drivers non of them works,so probably is audio device gone. Any...
Sound & Audio
failed new Windows Update installer code 800F081F after code 80072EE2
Hello, I have been working patiently for the better part of three days, but cannot resolve the issue. I can no longer use Windows Update. Something seems to have happened on or after 19 July -- the final date that updates were installed. Thereafter, only failure messages in the log (now wiped...
Windows Updates & Activation
BSOD PLaying League of Legends error code 0x0000001e a common code
Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much...
BSOD Help and Support
Windows Update errors Code 800B0100 and Code 8007065E, tried everythin
Hello, I am receiving the titled errors during windows update, I checked at windows support and tried every answer given there with no success. in addition, i think that this might be the cause that BattleField 3 crashes all the time.
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 03:42.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App