Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Usb code 10

22 Oct 2015   #61
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64
 
 

Just a thought.

What are your cpu temps under load with your over clock?
What are your vCore volts under load with your over clock?


My System SpecsSystem Spec
.
23 Oct 2015   #62
Driver170

Windows 7 64 bit
 
 

Hi with HW monitor MAX temp was 62. Vcore about 1.36
My System SpecsSystem Spec
23 Oct 2015   #63
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64
 
 

What kind of a load where those reading taken?
My System SpecsSystem Spec
.

23 Oct 2015   #64
torchwood

W7 home premium 32bit/W7HP 64bit/w10 tp insider ring
 
 
wireless

Hi,
Your wireless WILL have the advanced tab, and a lot of them have
Gaming mode enable/dissable.

Post a screenshot if not.

Roy
My System SpecsSystem Spec
23 Oct 2015   #65
Driver170

Windows 7 64 bit
 
 

Well i increased my CPU voltage from 1.12 to 1.13 seemed to
Do the trick :)
My System SpecsSystem Spec
23 Oct 2015   #66
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64
 
 

From post #62
Quote:
Vcore about 1.36
From post #65
Quote:
Well i increased my CPU voltage from 1.12 to 1.13 seemed to
Do the trick
If you would answer my questions completely, I might be able to help you.

Your cpu volts are what at what load or are the readings at idle.
My System SpecsSystem Spec
23 Oct 2015   #67
Driver170

Windows 7 64 bit
 
 

That was at full load. I use Nick N guide hes a guru best at OC haswell ever. Can't beat this guy.

Haswell: 4.8GHz on Air.. Building A Haswell System - SimForums.com Discussion
My System SpecsSystem Spec
23 Oct 2015   #68
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64
 
 

Okay. Watch your vcore and temps. At a 4.8 over clock your vcore (cpu volt) might have to be bumped up just a little.
The rule of the thumb is keep you vcore as low as you can without a BSOD and everything working properly; and yet keeping the temps under control.
My System SpecsSystem Spec
23 Oct 2015   #69
Driver170

Windows 7 64 bit
 
 

His guide goes up to 4.8 GHZ but i'm only clocked at 40 thats good enough for me!
My System SpecsSystem Spec
23 Oct 2015   #70
Driver170

Windows 7 64 bit
 
 

So can a wrong cpu volt cause USB instability? I think going to 1.13 has sorted it out will keep testing though for a few days to make sure!
My System SpecsSystem Spec
Reply

 Usb code 10




Thread Tools




Similar help and support threads
Thread Forum
Windows update errors found: code 80073712 & code 800B0100
Windows 7 pro updates got two error code. Please see attached updateerror1.png
Installation & Setup
Audio problem,Realtek AC97,Code 10,This device cannot start. (Code 10)
Basicaly the title explain it all,can find the driver for on board audio device. I just buy a second hand MBO.It is MSI Neo 4 H,MS-7125 Ver:3,Bios ver. V5.3 072106 Newly instaled Windovs 7 Ultima 64bits. Trayed few diferent drivers non of them works,so probably is audio device gone. Any...
Sound & Audio
failed new Windows Update installer code 800F081F after code 80072EE2
Hello, I have been working patiently for the better part of three days, but cannot resolve the issue. I can no longer use Windows Update. Something seems to have happened on or after 19 July -- the final date that updates were installed. Thereafter, only failure messages in the log (now wiped...
Windows Updates & Activation
BSOD PLaying League of Legends error code 0x0000001e a common code
Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much...
BSOD Help and Support
Windows Update errors Code 800B0100 and Code 8007065E, tried everythin
Hello, I am receiving the titled errors during windows update, I checked at windows support and tried every answer given there with no success. in addition, i think that this might be the cause that BattleField 3 crashes all the time.
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:30.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App