Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Hardware check reveals new USB stick has error 19

31 Jan 2016   #1

XP Pro (x86) | 7 HP (x86) & (x64) | 7 Pro (x64)
Hardware check reveals new USB stick has error 19

My new Lenovo comes with a plethora of "features", one of which does a hardware check on a daily basis.
- overkill in my opinion

A near new SanDisk Ultra USB3 16GB thumb Drive has been identified by the Lenovo hardware check as a "problem", as Code 19
But the thumb-drive has not produced any problems, reading and writing ? Format is FAT32. Used space <1%

Hardware check reveals new USB stick has error 19-01_general-tab.png Hardware check reveals new USB stick has error 19-02_driver-tab.png

The "stick" is working perfectly between various PCs
Q1: What is Code 19 ?
Q2: Where might I find a list of such "codes" ?

Would appreciate any help, thank you :)

Intel i5 | 500GB HDD | 4GB RAM | 2x USB3 | 1x USB2
Win-7 PRO 64-bit
- new out of the box, no apps installed yet

My System SpecsSystem Spec
31 Jan 2016   #2

W7 home premium 32bit/W7HP 64bit/w10 tp insider ring

Hi Bawldiggle,

Interesting screenshot,
W7 DOES NOT have any USB3 drivers, your gonna have to get them from Lonovo, type in your make/model, or Sandisk.

I suspect you have a couple of problem devices in Device manager thats where youll need to install.

My System SpecsSystem Spec

 Hardware check reveals new USB stick has error 19

Thread Tools

Similar help and support threads
Thread Forum
Hardware Check
Recently, my computer has seemed a bit slower and just last night while watching a YouTube video, the video froze, the monitor went black and came back on but the video was black and the buttons in FF did not load properly. I researched the error online and many people were stating that the issue...
Hardware & Devices
BSODs with various bug check codes after upgrading hardware
Hi! I recently upgraded my CPU and Motherboard to an Intel i5 4670k and Gigabyte GA-Z87-HD3, respectively. This was around the 27th December, so BSODs prior to this were a problem which I have since resolved. The blue screens occur at no specific time, and seem to have a different bug check code...
BSOD Help and Support
How to check what piece of hardware is broken
How would I test which piece of hardware is broken: a sata to usb adapter or an internal harddrive? Sometimes, nothing is wrong at all. Other times, the harddrive keeps on disconnecting from my computer at random times, and im afraid it might destroy the platters from constantly stopping abruptly. ...
Hardware & Devices
Think I found the bad memory stick, how to run Memtest86 to check it?
I had a bad memory stick that I was finally able to pin point I think. I have Memtest86 on a disc ready to go, how can I test this specific memory card only? Do I have to take the other 3 out & run the disk, or is there a way to run all together and I can pick which memory slot for it to...
Hardware & Devices
How/where to check whether hardware is compatible with 64-bit windows?
How/where can I run a diagnostics test to check whether a particular hardware is compatible with 64-bit windows? How/where can test to check whether it driver is compatible with 64-bit windows as well? Edit: It's called Upgrade Advisor.... Will it work if I'm already on Windows 7? I don't...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:53.
Twitter Facebook Google+