New
#1
Drive not seen in Computer, present in Device Manager but unavailable.
Hi all,
Here's my problem and how far I have got with it: Windows can't see WDC WD25 00JS-60NCB1 250GB SATA hard drive either installed internally or attached by USB in caddy; This drive was migrated from a build that has stood idle for a while without a monitor. I accidentally booted this computer and had to shut it down with the power button. In the build the drive has been migrated to the USB to ATP/ATPI bridge is seen in Device Manager but the drive is marked unavailable. The drive can be seen from an Ubuntu Live disc and some files can be accessed but the drive dismounts after a few minutes and shows as needing formatting. The Disks Accessory shows all the partitions (Drive has a Windows and at least one Linux install); GParted stalls with errors.
I followed jumanji's Post 3 at disk 1 is unknown, not initialized, unallocated and installed/ran MiniTool Partition Wizard 9.1; however, when the Partition Recovery Wizard completed scanning it showed one partition overlapped with another and at the recovery prompt said that at least one partition would be deleted and I am unsure how to proceed. An 87.1GB partition is showing as existing but unformatted; this then shows up without a file system and overlapping several Linux Ext4 partitions, see screenshots.
I'm not sure what is going on here; I would have expected it to come back showing a Windows data partition formatted NTFS and a Linux Ext4 partition subdivided Root, Home, Swap etc, both marked as existing: this is what the Disks Accessory shows in Ubuntu and how I remember the drive as set up.
I am going to log out now and reboot into Ubuntu to see if the drive will show up long enough to get some screenies of what the Disks Accessory and the file manager can see.
Attachment 389137
Attachment 389138
Attachment 389139
Attachment 389140