SWAP backup/image drive to larger 1 WITHOUT losing data

Page 1 of 2 12 LastLast

  1. Mega7User
    Posts : 20
    Win 7
       New #1

    SWAP backup/image drive to larger 1 WITHOUT losing data


    Posted in backup/restore forum ( I want to switch my win7 ult image/backup drive to a larger one ) BUT seems that post went dead without a resolution(?) Simply put, Win 7 Ult with 3 HDD's, 'E' drive is now FULL with an image and backups. Need to increase the drive size but do not know how to without LOSING the complete record on the old drive. IF cloning it will work, I have Easus PM Pro (which I believe can accomplish the cloning task) BUT am not positive the data will be usable (is there some kind of data trail assigned to that data [drive] that would fail a recovery [if moved to a larger drive] due to it not being the original drive it was saved to). So, seeing as this forum is about hardware, and HDD's are hardware, I am hoping someone has done this before, and it was successful?
      My Computer
    Quote Quote

  3. samuria
    Posts : 3,786
    win 8 32 bit
       New #2

    A clone is a exact copy of the drive so if you clone it it will work and should give you the option to grow the partition on the new drive
      My Computer
    Quote Quote

  4. Mega7User
    Posts : 20
    Win 7
    Thread Starter
       New #3

    samuria said:
    A clone is a exact copy of the drive so if you clone it it will work and should give you the option to grow the partition on the new drive
    And I thank you again for your reply, both here and in the first post. I will break down the tower and swap the drives in the next couple of days. Just for us, I did not dismiss your first reply in the other post, I just wanted to be sure I didn't feck up my original image and history. Much appreciate your help! All I have to do is review the PM Pro software, it has been quite a while since I opened that proggie. Yeah, quite a few years that's for sure...
      My Computer
    Quote Quote

  6. Megahertz07
    Posts : 7,351
    Windows 7 HP 64
       New #4

    People here use Macrium - Macrium Reflect Free
    Seems to be very good. And is free.
      My Computers
    Quote Quote

  7. Wandering one
    Posts : 259
    Win7 sp1 Pro 64bit / XP sp2 Pro (games only)
       New #5

    For future consideration. I use Macrium free to image to a USB HDD. Depending on what is connected the drive letter can go anywhere from J - M. All I do is select where to send image or where to restore from (never seems to be the same place) and all works perfectly.
    Art.
      My Computer
    Quote Quote

  8. Lady Fitzgerald
    Posts : 9,600
    Win 7 Ultimate 64 bit
       New #6

    I learned the hard way you can't clone from an MBR drive to a GPT drive without the GPT drive being converted to MBR. This would be a problem if the GPT drive was larger than 2.2TB since 2.2TB is the upper limit for MBR.
      My Computer
    Quote Quote

  10. Eric3742
    Posts : 708
    Windows 7 x64
       New #7

    Lady Fitzgerald said:
    I learned the hard way you can't clone from an MBR drive to a GPT drive without the GPT drive being converted to MBR. This would be a problem if the GPT drive was larger than 2.2TB since 2.2TB is the upper limit for MBR.

    Agreed on this one.

    Avoid using HDD more than 2TB for Windows OS.

    Did tried to clone from 500GB HDD to 3TB HDD cause error.

    There may have other issue too, as i found out a bit too late;
    As had to redo all the backup again.
      My Computer
    Quote Quote

  11. Lady Fitzgerald
    Posts : 9,600
    Win 7 Ultimate 64 bit
       New #8

    Eric3742 said:
    Lady Fitzgerald said:
    I learned the hard way you can't clone from an MBR drive to a GPT drive without the GPT drive being converted to MBR. This would be a problem if the GPT drive was larger than 2.2TB since 2.2TB is the upper limit for MBR.

    Agreed on this one.

    Avoid using HDD more than 2TB for Windows OS.

    Did tried to clone from 500GB HDD to 3TB HDD cause error.

    There may have other issue too, as i found out a bit too late;
    As had to redo all the backup again.
    The drive I found this out on is not an OS drive.
      My Computer
    Quote Quote

  12. RolandJS
    Posts : 2,774
    Windows 7 Professional 64-bit
       New #9

    Mega7User, the only small glitch you might run into: pretend you used Macrium Reflect [to make this easier to explain]; pretend you had MR make a log of your backup; during a restore, if using that log, that log will probably not be able to "find" the new location of the backup image made earlier.
    What I have done is simply not make any logs with either Macrium Reflect or Image for Windows. During any restore, I simply "aim" the restore module at the location of the full image I want restored.
      My Computer
    Quote Quote

  13. AddRAM
    Posts : 13,576
    Windows 10 Pro x64
       New #10

    Just start creating your new images on the new drive and continue to save data just as you have on the other drive, transfer the data from the other drive if you feel the need.

    When you have the new drive to your liking either format the smaller one or leave it alone, or simply remove it from the system.

    Someone mentioned a clone, I would never clone an image or even the data, too many things can go wrong.

    Just create a brand new image on the new drive.
      My Computer
    Quote Quote

 
Page 1 of 2 12 LastLast

  Related Discussions
:banghead: I have a 320GB image/backup drive giving me 'low free space', and want to replace it with a 500GB drive. I thought I could just copy/paste the files into the 500GB drive but they are not there (o byte files). Tried researching for hours but all I could find was info on how to install...
can someone help me install win 7 ultimate x64 on a partition? hello I'm currently trying to install win 7 Ult x64 on a separate partition for my backup partition without deleting my backup partition currently I have one disk with 2 partitions and a allocated space the first one is newly...
I have been doing a nightly windows backup w/system image for years. Even used it successfully to recover after a disk crash last year. The system image has slowly grown as my stuff has grown which makes sense. I am using a total of 170G on the C:drive now(out of a total of 1TB). I believe...
Hello, I am in the process of upgrading to an SSD. My original HDD showed about 165GB, but the best I can tell in the Windows 7 backup image there was a file that is 289GB. I only bought a 250GB SSD, so I did not attempt to use the image for the new drive. My questions Is it normal...
Alright, I did a backup image in Windows 7 Ultimate 64-bit from a 500GB drive. I then took that out and put in a new Barracuda 3TB sata3 drive. After it was done restoring the image I extended the volume and of course it only gave me 2TB of space. So after reading a bit I needed to use Seagates...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 18:32.
Find Us