Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Computer does not recognize camera

20 Mar 2017   #1
Retiredbill

Win7, home premium, 64 bit
 
 
Computer does not recognize camera

My wife took some pictures with her camera but she is unable to load them into the computer. In the first place, the menu does not come up on the screen as it used to. I also tried 2 photo programs and none of them recognized the camera. I even switched the USB port to the one on the front of the box (I have a desktop computer). She uploaded a set of pictures a month ago with o problem. Any suggestions or possible photo loading programs to try. Thank you.


My System SpecsSystem Spec
.
20 Mar 2017   #2
Barman58

Windows 10 Pro x64 x2 Windows 10 Enterprise x64, Ubuntu
 
 

First things first, is the camera fully charged, or on mains power? do you have a second USB cable to use for the transfer? These two items are amongst the most common issues with a "Non Working" Transfer. The next thing to try is another device, a USB pen drive is something that most people these days have access to, and as they do not have a cable it can remove the possibility of a broken cable

You are normally better off using the rear ports as they are directly attached to the motherboard so are less likely to have a bad connection,

The other thing to try is - Does the camera have a removable "SD" or similar memory card? If so you may be able to read it using an adaptor, (assuming that your PC does not include a card reader)
My System SpecsSystem Spec
20 Mar 2017   #3
samuria

win 8 32 bit
 
 

What is the camera and is there a setting on camera for USB?
My System SpecsSystem Spec
.

20 Mar 2017   #4
Retiredbill

Win7, home premium, 64 bit
 
 

The first thing I did was to replace the battery with a fully charged one. No help. I replaced the USB cord with no results. The only other device I have is my smartphone. I connected it to the same USB port and the computer recognized it. The camera doses have an SD card and I'll go thru my junk box to see if by any chance I have an adapter. The camera is a power Shot G11 and I don't know of any USB turn on device or button. She has used the camera numerous times before with no problem. Thank you very much for your prompt and very thorough response.
My System SpecsSystem Spec
20 Mar 2017   #5
Barman58

Windows 10 Pro x64 x2 Windows 10 Enterprise x64, Ubuntu
 
 

One thing to check, is if there are more that one connection mode- some cameras can use MTP mode as well as the more traditional connection - you would need to check with the camera manual, for options and how to set these, (most are available online as PDF if you do not have one to hand)
My System SpecsSystem Spec
21 Mar 2017   #6
Retiredbill

Win7, home premium, 64 bit
 
 

The connection we are using is exactly the same one that we used a two weeks ago and it worked fine.
My System SpecsSystem Spec
21 Mar 2017   #7
Mellon Head

Win 7 Pro x64/Win 10 Pro x64 dual boot
 
 

Bill,

My camera interfaces to a PC with a certain series of steps, and I see from your manual that yours does too. For your camera the steps are easy:

1. Power off camera
2. Connect the USB interface cable
3. From the manual, press the following button

Computer does not recognize camera-camera.jpg

So, my question is, are you forgetting a step in this case?


The other possibility is that Autoplay has become disengaged from your camera. When a camera is hooked up to a PC, it behaves like a pen drive or "thumb" drive. If it is indeed working, you should be able to reach the camera using Windows Explorer. In the left hand pane, it should show up as a disk drive, with a disk letter and everything. You can then navigate it and get to your pictures that way. Just copy them off the camera as files instead of using the camera's included software.


My System SpecsSystem Spec
21 Mar 2017   #8
Retiredbill

Win7, home premium, 64 bit
 
 

Those are the exact steps we have used in the past 10 or 20 times we have uploaded photos. When connected, the camera does not appear in the drive list in W.E. In fact, there is also no autoplay menu appearing on the screen.
My System SpecsSystem Spec
22 Mar 2017   #9
iko22

Windows 7 x64, Vista x64, 8.1 smartphone
 
 

I have exactly same problem with a Canon Powershot G9. Had been using the computer to upload my pictures from the G9 for many years, and the transfer had always worked all the time. Then suddenly the computer stopped recognising the camera when I plugged it in to the computer via the USB cable.

When the camera was plugged into computer, the computer would charge the camera's battery (showed up in camera lcd panel) but it would not display the device as available in the Windows operating system.


1. I tried camera on a different computer and it worked fine the very first time. The computer just loaded the device drivers automatically, then I could choose what to do via the auto play (as you'd expect with a working camera and computer).

2. After I plugged camera back into my computer, still nothing. I tried using DISKPART and typed LIST DISK, and the memory card had not showed up there.

3. However I could see the device listed as REMOVABLE MEDIA in the computer's BIOS options screen.



So Bill, if you venture to try all the things as I have done, then I think you would only get as far as me; device displays in BIOS firmware as REMOVABLE MEDIA, yet Windows OS fails to detect device when using Windows Explorer, Auto Play or DISKPART.

A quick check of Control Panel > Hardware and Sound > AutoPlay shows both my G9 camera's as being selected by "Ask me every time".

Picture shows Auto Play setting for G9's.
Computer does not recognize camera-device-autoplay.jpg

Does Group Policy have any over-riding settings for media devices? Is there any thing else that would help diagnose the cause of the issue?


My System SpecsSystem Spec
22 Mar 2017   #10
Ranger4

Windows 7 Home Premium 64 bit sp1
 
 

It would seem that the problem might be with the camera.

If you get a USB Hub & Card Reader, you should be able to take the SD card from the camera & put it into the card reader & transfer the photos to your computer.
My System SpecsSystem Spec
Reply

 Computer does not recognize camera




Thread Tools




Similar help and support threads
Thread Forum
computer stopped seeing my camera (USB issue?)
I can no longer transfer pics from camera to computer. When I plug camera into computer nothing happens. it used to work fine and ive made no changes. Except for the latest win security update. Not sure if my issue started right after that, but maybe. canon powershot a520. win7 sp1 with all...
Hardware & Devices
Camera to computer upload software
I've been looking for software that I can use to upload images from my camera to my computer. I haven't yet found one to satisfy my wants. Here is what I want; 1 Be able to select images 2 Be able to selectively erase images that have been uploaded to the computer 3 Be able to create a new...
Music, Pictures & Video
Win 7 does not recognize my Canon 7D camera - driver not found
I have just built a new Win 7 Ultimate N-based PC for photo editing. When I attach my Canon 7D, the camera appears in my devices list with a warning (troubleshoot). When I do this it searches for the device driver, but comes back with an error that says that the driver was not installed...
Drivers
computer does not see camera connected by usb cable
I have a digital SLR camera, the Sony A200 and when I connect it to the computer running Windows 7 premium I get no response from the computer. The camera should automatically appear on screen with prompts to import pictures or view them. Can anyone help with this. Thanks
Hardware & Devices
Windows Live Movie Maker Does Not Recognize My Camera
Windows Live Movie Maker Does Not Recognize My Camera to Import Video into the Windows Live Movie Maker Program. A Corel Movie Maker program does recognize my camera and allows for importing of video. Can someone please help me. Thank You, George Jurak
Music, Pictures & Video


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:49.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App