Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Force USB 3.0 ports to be recoginzed as USB 2.0 Ports

07 Apr 2017   #1

Windows 7 Ultimate x64
Force USB 3.0 ports to be recoginzed as USB 2.0 Ports

I know this sounds bizarre, and many not be possible, but bare with me.

I have a program that only runs on Win 7 that is used to program Solid State Logic Circuits (SSLC's) - (the developer is taking FOREVER to write a Win 10 Compatible version ).

To make matters worse, THAT program does NOT recognize USB 3.0 ports, and my new computer ONLY has 3.0 ports on it.

Is there a way to trick/hack/fool the OS (and thus the program running on it) into seeing the USB ports as 2.0 only?
Registry Hack?
Something Else?

The USB cable that I use to program the SSLC's is 2.0 (on one end) only as well.

Your assistance would be greatly appreciated.

My System SpecsSystem Spec
10 Apr 2017   #2

Windows 7 Ultimate x64

. . . I am guessing that I may be out of luck here.
No one knows if this is possible?
My System SpecsSystem Spec
10 Apr 2017   #3
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64

I'm guessing but I think like me most don't understand how a program knows whether a port is usb 3.0 or usb 2.0 or why it would care.

From your post #1

To make matters worse, THAT program does NOT recognize USB 3.0 ports, and my new computer ONLY has 3.0 ports on it.
Usb ports don't care what kind of data goes through them. As far as I know the only difference between 2.0 and 3.0 is the (up to) maximum speed they work at.

My System SpecsSystem Spec

10 Apr 2017   #4

Windows 7 x64, Vista x64, 8.1 smartphone

To the best of my knowledge
in the Serial Port Era, programmers used to bypass Microsofts code library routines write directly to the hardware ports,
to speed up their programs. I don't know if that is the issue you are experiencing here, with second or third generation USB?
My System SpecsSystem Spec
10 Apr 2017   #5

Windows 7 Pro 64 bit

If the program really does not work with USB 3.0 it is likely due to some incompatibility, rare as that may be. If that is the case fooling the program is unlikely to be useful. If the program goes to the trouble of distinguishing between USB 2.0 and USB 3.0 it is likely because it needs to know. The fooled program would likely fail when it actually attempted communication or it would not operate as intended.

In any case I know of no such method and doubt it would be simple.
My System SpecsSystem Spec
10 Apr 2017   #6

Win7 pro x64

trying disabling xHCI in bios
My System SpecsSystem Spec
10 Apr 2017   #7

Windows 10 Pro x64 x3, Ubuntu

USB3 and USB2 are wired differently so if the software is expecting the signal on a set port this could be the issue, ( as you said developers used to "re-invent the wheel" at times to suit their ideas, I can remember many hours spent re-wiring Serial and Parallel plugs and sockets, to get live data from PLC's and data sources)

This may be of help USB 3.0 to USB 2.0 Internal Adapter Cable - 19pin to 9pin - or similar (could be old link ), but would need a USB2 cable from the adapter to an external port either at the PCI sockets - A cheap Two or Four Port PCI USB2 card could also meet your needs and may not need the adapter. if you have space or even just a cable taken through any suitable Hole in the case.

Don't forget to back charge your costs to the software developer
My System SpecsSystem Spec

 Force USB 3.0 ports to be recoginzed as USB 2.0 Ports

Thread Tools

Similar help and support threads
Thread Forum
Front USB ports not working, but rear USB ports work…
This is a brand new custom built PC for web browsing for a motel lobby. Win7 Home Premium AMD A4-3300 Llano MSI A55M-P33 FM1 Rosewill FBM-02 MicroATX Mini Tower Running latest BIOS and latest drivers downloaded directly from manufacturer's website. I tried switching between all 3...
Hardware & Devices
USB 3.0 ports refuse to work as USB 3.0 ports
A few days ago I installed a USB 3.0 card (to be precise, this one: 2-Port USB 3.0 SuperSpeed PCI-E Controller Card - Free Shipping - DealExtreme). It uses the very common NEC µPD720200 USB 3.0 controller. I installed the required drivers for Windows 7, and the card worked fine for the first...
Hardware & Devices
USB ports
Hi all, new here, I will give specs and ask for some help. First, new home build This is about the 6th or 7th time I have built a comp, from scratch Asus P6T MB i7 2.66 Noctua fan 2 sets patriot mem evga 260, 216 896 overclock card m-audio 1066lt Win 7 750 gig HD
Hardware & Devices
USB ports not 2.0
My USB ports on this Gigabyte mobo are SUPPOSED to be all USB2.0 So, how come I still get "This device can run faster" messages in my Win7 64 bit home premium installation?? I went to Gigabytes webpage and installed the chipset drivers for Win7 on there, but still get the same message when I...
Help With Ports in Win 7
Hello All, My first time here so I'm not sure this is right forum for this question. First a little background: System - Dell Inspiron 546, Windows 7 Home Premium x86 64 bit. I'm an Engineer/Designer/Machinist and work with CAD/CAM programming. After I create the programs with the...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 21:29.
Twitter Facebook Google+