Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Conputer boots up but no display.

02 Jun 2017   #1
jacek11

32 bit Windows 7 Ultimate x64
 
 
Conputer boots up but no display.

Hello I just got this problem today randomly so I just booted my pc and it worked normal I logged in and then after 2 seconds I logged in boom the whole screen goes black i restart the pc and the Acer logo pops up very little and it's very hard to see it. After the logo dissappears I get 10 beeps from my pc and them nothing else happens.
Any help would be appreciated!


My System SpecsSystem Spec
.
02 Jun 2017   #2
cosmicanddavid

 
 

it sounds like a malware virus or trojan have changed your configurations setting if you goto the start and press f8 and goto back and see the last known configuration that works it should sort it out to me i think somehow something have disabled your window desktop manager services if you can get into safemode by pressing f8 at the start and then goto services you should find desktop manager see if it diabled and restart it to automatic start hope it works worst case scenerio you have to reuninstall all your software to find out what causing the confliction on your device the tool iobit driver update tool might solve the problem
My System SpecsSystem Spec
02 Jun 2017   #3
jacek11

32 bit Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by cosmicanddavid View Post
it sounds like a malware virus or trojan have changed your configurations setting if you goto the start and press f8 and goto back and see the last known configuration that works it should sort it out to me i think somehow something have disabled your window desktop manager services if you can get into safemode by pressing f8 at the start and then goto services you should find desktop manager see if it diabled and restart it to automatic start hope it works worst case scenerio you have to reuninstall all your software to find out what causing the confliction on your device the tool iobit driver update tool might solve the problem
Yes but I cannot access f8 since I cannot see the letters simply the screen is very dark and even a man with pro eyes can't see it.
My System SpecsSystem Spec
.

02 Jun 2017   #4
Megahertz07

Windows 7 HP 64
 
 

F8 is before OS is loaded. If you don't see anything at this stage, probably you have a hardware issue.
Hardware problems has to be fixed by replacing it.
My System SpecsSystem Spec
02 Jun 2017   #5
jacek11

32 bit Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Megahertz07 View Post
F8 is before OS is loaded. If you don't see anything at this stage, probably you have a hardware issue.
Hardware problems has to be fixed by replacing it.
But what hardware could be involved in this?
My System SpecsSystem Spec
02 Jun 2017   #6
cosmicanddavid

 
 

man try to download windows recovery setup it looks like something deleted all your system32 files you are screwed in my opion try a different keyboard malware sometimes ruin your keyboard up i had a trojan in my keyboard when i had xp a few years back lastly i cant think of anything else unless you get a kaspersky rescue disc but that wont work because all the important files in my opion have been deleted looks like a repair shop is the solution in my opion drivers and software hardware conflicts usually cause blue screeen of death but to me something deleted every file on your pc it looks like a new harddrive and fresh install of windows is a solution in my opion
My System SpecsSystem Spec
02 Jun 2017   #7
Megahertz07

Windows 7 HP 64
 
 

Quote   Quote: Originally Posted by jacek11 View Post
But what hardware could be involved in this?
It's probably a defective GPU or screen.
Can you enter BIOS settings?
My System SpecsSystem Spec
02 Jun 2017   #8
jacek11

32 bit Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Megahertz07 View Post
It's probably a defective GPU or screen.
Can you enter BIOS settings?
I can but I can't see a thing there and also the pc now logs in normally but the screens not visible so I somehow managed to install pc remote on my pc and I control it on my phone now.
My System SpecsSystem Spec
02 Jun 2017   #9
Megahertz07

Windows 7 HP 64
 
 

Try to use an external monitor.
If it works, it's probably a screen issue. If it doesn't it's probably a GPU issue.
My System SpecsSystem Spec
02 Jun 2017   #10
jacek11

32 bit Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Megahertz07 View Post
Try to use an external monitor.
If it works, it's probably a screen issue. If it doesn't it's probably a GPU issue.
I tried it on external it works on there so it's a screen issue thanks everyone for help!
My System SpecsSystem Spec
Reply

 Conputer boots up but no display.




Thread Tools




Similar help and support threads
Thread Forum
No display during cold boots
I am having this issue for the past few days and the issue comes randomly and not for every cold boots. Everything will be on but monitor shows no signal. If I restart CPU by pressing power button, then for the next boot, display comes. What all things I have done are 1) Checked monitor and its...
Hardware & Devices
pc boots but no display when i plug my graphics card
OK, so, it's been a half year since I have a nvidia gt 440 2gb ram and so on. And recently sometimes freezes my PC and I get a black screen(sometimes other colors), but that's not the problem, so I wanted to change my graphics card until I get a new one with an ATI Radeon Sapphire X1550 that I...
Graphic Cards
conputer freezing even in safe mode
It started happening last night. Came home computer was locked up. Reboot it and 20 mins later it would lock up no bsod just full locked with some artifacts on the screen. Similar thing would happen in safe mode except it would reboot itself. Still happening now except much more frequent and...
BSOD Help and Support
Boots up fine but no display (needs restart)
Hi, The PC boots up fine - I know it's going through POST properly and everything works, there's just no display. What I've tried: 1. Replaced DVI cable. 2. Upgraded graphics card (not specifically to fix this). Re-seated card. 3. Checked BIOS graphics configuration. This was set to...
Graphic Cards
Windows boots but no display
I recently built my son's new gaming rig for his birthday, with an Asus Maximus V Gene mobo and an HD 7870XT, and everything seemed to be working fine. Installed Windows 7 Pro, drivers, and Windows updates, rebooting periodically without any problems. Upon giving him the new rig and setting it...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:49.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App