New
#1
Help with RAM timings
The board I ma using is a Gigabyte GA-890FXA-UD7 and it has the old type legacy BIOS and I don't really know that much about using it because it comes up with loads of tech abbreviations that I just don't know what to do with.
There are two things I would like some help with
1. in the BIOS settings I have an option for IDE one for ACHI and one for something I am not familiar with but all the SATA connections are listed under IDE ones and I am wondering if I should change the IDE to ACHI and why are the drives showing up as IDE settings the C: dive also showing as a slave drive no matter what I plug it into on the board's SATA 3 sockets. .
2. The board has two sticks of 1600MHz RAM installed and is set to auto which is giving me at present a DDR of 1333MHz and I would like to make it run at 1600MHz
Now in the pics are the choices I have but have no idea of what to set the options are. I will try to download them in sequence but it is the last one that I have no idea on what to change if I go manual.