Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 BSOD from Setpoint

15 Jul 2017   #1
jsc145

Windows 7 Pro x64
 
 
Windows 7 BSOD from Setpoint

I have a fairly new Dell 3620 Desktop that is really enjoyable. It has been great and I've been using a Logitech Wireless (MK 710) combination Keyboard and M705 mouse along with the newest version of Logitech Setpoint. Recently the PC performance started to act up and I had issues with long shutdowns and crashes. When the PC would hang at shutdown it would proceed fine if I pulled the Logitech wireless receiver from the USB port. When I reinstall Setpoint from Logitech I get a BSOD and have no choice but to remove the software. This results in much less use of the nice keyboard and hotkeys. Any suggestions and ideas on a fix are appreciated. I don't know if a recent Windows Update clashes with Setpoint or if a setting is triggering this issue. I'd just like to use Setpoint. Right now I'm just allowing Windows to set the drivers for the mousse and keyboard and they are working fine. I guess this is an option, but I'd like to use Setpoint again if possible.

I'm attaching the BSOD image in a photo I took and hope that might help.




Attached Files
File Type: pdf Logitech Setpont BSOD Screen.pdf (2.57 MB, 1 views)
My System SpecsSystem Spec
.
15 Jul 2017   #2
Ranger4

Windows 7 Home Premium 64 bit sp1
 
 

Hi jsc145, welcome to the Forum.

Have you had a look in Device Manager to see if you have any yellow exclamation marks in either the keyboard or mouse devices.

This might be a silly suggestion, but when you downloaded the latest Logitech Set Point software did you make sure you selected the 64 bit version & not the 32 bit version. I have a Logitech wireless mouse which uses probably the same software & I don't have any problems at all.
My System SpecsSystem Spec
16 Jul 2017   #3
jsc145

Windows 7 Pro x64
 
 

I'm sure I installed the 64 bit version of Setpoint. There are no exclamation points at all in device manager. Just seems like a driver issue. That is what I'm told the BSOD message states.
My System SpecsSystem Spec
.

16 Jul 2017   #4
Megahertz07

Windows 7 HP 64
 
 

Open a cmd window and type:
- Chkdsk c: /f - Schedule to do a disk check on next boot
- SFC /scannow - to do a System File Check
My System SpecsSystem Spec
16 Jul 2017   #5
jsc145

Windows 7 Pro x64
 
 

Just ran Chkdsk and it returned no errors. Just so baffled. Setpoint was running on this pc without issue for months and now it's an issue. Fairly certain it's a driver issue but cannot install and run Setpoint without it crashing pc.
My System SpecsSystem Spec
16 Jul 2017   #6
Ranger4

Windows 7 Home Premium 64 bit sp1
 
 

Have you installed any new software that might be causing the issue, or changed your anti virus software. As you have said the computer ran the Logitech software for ages without a problem & now it has one, so something has changed. As far as I know MS updates have not caused any Logitech problems.

One easy thing worth trying would be to change the USB port where the Logitech wireless receiver is plugged in.
My System SpecsSystem Spec
16 Jul 2017   #7
jsc145

Windows 7 Pro x64
 
 

I have tried multiple usb ports. I have however, switched to a new Antivirus (Eset Nod32). I disable the antivirus when installing Setpoint. Not sure Nod32 is causing the issue.
My System SpecsSystem Spec
16 Jul 2017   #8
torchwood

W7 home premium 32bit/W7HP 64bit/w10 tp insider ring
 
 

Hi Jsc,
You could try rolling back the driver

Roy
My System SpecsSystem Spec
16 Jul 2017   #9
Ranger4

Windows 7 Home Premium 64 bit sp1
 
 

jsc145, when you uninstalled your old anti virus did you use their uninstall utility, as just using the normal Windows uninstall does not remove AV programs properly, in fact uninstalling AV programs can be difficult as remnants are often left behind that interfere with a new AV program.
My System SpecsSystem Spec
17 Jul 2017   #10
jsc145

Windows 7 Pro x64
 
 

Quote   Quote: Originally Posted by torchwood View Post
Hi Jsc,
You could try rolling back the driver

Roy
I thought about this a few days ago. I removed the native Windows drivers for the mouse, keyboard and wireless transmitter. Then, I installed Setpoint with the included drivers. Same issue. I also removed the previous antivirus before installing Setpoint. I'm at a loss of what to do but may just end up leaving the keyboard and mouse alone. They are both working fine with Windows drivers and the pc is very stable. I just would like the hotkey functions provided by Setpoint on the keyboard.
My System SpecsSystem Spec
Reply

 Windows 7 BSOD from Setpoint




Thread Tools




Similar help and support threads
Thread Forum
Need working setpoint 4.8 for windows 7 64 bit
This latest setpoint software i just had has only been trouble to me and ive been trying to go back to the version i used to had and was fully functional but ive been searching and cannot find... can anyone give me a link where can i download this file? :cry:
Drivers
Another Logitech Setpoint problem.
I get most of the way through the installation, and then the window just kills itself. The only info I could find is that the Log says File created on 1-18-2009 at 02:17:48 Product : SetPoint version 4.70 02:17:48 = Before khal launched 02:17:48 = Installing khal... 02:17:48 =...
Drivers
Logitech EX 310, Windows 7 & Setpoint
Hey guys, I got a Logitech EX 310 for Christmas. I installed everything find when i get the set, but until a few days ago, my music controls started to play up. I reinstalled set point and no luck. I uninstalled set point and it works perfectly.... although some of the mouse features don't...
Hardware & Devices
Logitech SetPoint installation
I have a Cordless Logitech Mouse and I need SetPoint 4.70 installed in order to be able to set my buttons. The problem is that I am unable to get it installed, I tried the compatibility wizard and set it on Windows Vista, Xp SP2 and still no luck. I get the following error message:
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:37.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App