Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Need help getting 24 pin connector out of motherboard

09 Aug 2017   #1
DeathByMayson

Windows 7 Home Premium 64 bit
 
 
Need help getting 24 pin connector out of motherboard

I've tried everything to pull this connector out but it just doesn't seem to work. I push the pin down, I wiggle it, and do everything people say to help pull it out but it won't budge.


My System SpecsSystem Spec
.
09 Aug 2017   #2
samuria

win 8 32 bit
 
 

You mean power cable? Normally there is a tab at the side you need to press to release
My System SpecsSystem Spec
Reply

 Need help getting 24 pin connector out of motherboard




Thread Tools




Similar help and support threads
Thread Forum
Replacement USB to Motherboard Connector
Hi All, I recently sleeved all the cables in my computer case and in the process, I ended up breaking the plastic USB connector (pictured below) for my computers front panel. I figured I could just order an extra connector but after searching for quite sometime, I cannot find anything. ...
Hardware & Devices
ASUS P8Z77-M Motherboard Power Switch Connector?
I cannot find the power switch connecter on this mother board, it's not even listed in the manual, that I could find any way. Any help would be much appreciated!
Hardware & Devices
PSU with no 4-pin connector to motherboard
Hi I just brought a new graphics card and a PSU (Corsair TX850). Everything my old PSU was connected to now has my new PSU, except for one 4-pin white box on the top right hand of my motherboard (Biostar TH55B HD) as my new PSU does not come with a 4-pin cable. My motherboard can be seen...
Hardware & Devices
C Drive Connected to Motherboard SATA Connector 3 Instead of 0.
Hi...my Intel SSD which is my OS-C drive is connected to the motherboard SATA connector designated as SATA connector 3. On initial install of W7 I had a problem where the MBR was installed on my internal N drive (connected to motherboard SATA connector 0 ) instead of on same drive as OS. I have...
Installation & Setup
!@#$%^&* need on this small connector on my motherboard
im currious what this BT1 connector is for nothing is connected to it.
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:02.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App