Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Printer stopped being recognized by computer

25 Oct 2017   #1
DPChristm

Personal Home Use Only Operating System Windows 7 Professional (x64) Service Pack 1 (build 7601.2420
 
 
Printer stopped being recognized by computer

I am no longer able to print wireless to my Canon MP-495.

Very recent development

When I try to connect to printer, it says it is offline, which it isn't (I can print from other devices)

when I try to Open Devices and Printers from the control panel, it just hangs, with the green bar slowly creeping across, but never populates.

My Computer is an Acer V3-551
AMD A8-4500 Processor 64 Bit
8 GB of RAM
Running Windows Home Premium SP1


Any Thoughts?


My System SpecsSystem Spec
.
25 Oct 2017   #2
mrjimphelps

Linux Mint 18.2 xfce 64-bit (VMWare host) / Windows 8.1 Pro 32-bit (VMWare guest)
 
 

"Windows Home Premium SP1" -- Which version of Windows do you have? 7? 8.1? XP?

I have a Canon printer. It refuses to print in Windows 7, unless I reinstall the printer software. It will then work for a few minutes, and then I can't print to it anymore.

However, I never have any problem printing to it from my Windows 8.1 laptop.

I can print to it without a problem in Linux Mint. However, if I open the printer status window and look at the messages, I find that when Linux first sends the print job, a message is displayed that the printer is offline. But Linux keeps trying, and momentarily after that message is displayed, it prints without issue.

In short, I think there is a problem with Canon printers showing that they are offline. (Maybe they are offline momentarily.) In my experience, Windows 7 is unable to overcome this error; but Windows 8.1 and Linux Mint are able to overcome it.


I rarely run Windows 7; but some things I plan to try include:
  • Installing an older version of the printer software.
  • Installing a newer version of the printer software.
  • Installing either the Vista version or the Windows 8.1 version of the printer software.
Try some of those things; in my experience, you may in fact solve the problem by performing one of these tasks.

Good luck.

Jim
My System SpecsSystem Spec
25 Oct 2017   #3
DPChristm

Personal Home Use Only Operating System Windows 7 Professional (x64) Service Pack 1 (build 7601.2420
 
 

Thanks anyway, but that did not work. Even after reinstalling, I get a "Printer not responding" message. Even when trying to print while connected via USB.

I am thinking the problem has to be somewhere in my msconfig or services set up

My System SpecsSystem Spec
.

Reply

 Printer stopped being recognized by computer




Thread Tools




Similar help and support threads
Thread Forum
hard drive NOT recognized in computer but IS recognized in disk mgmnt.
I just rebuilt an old system using Windows 7 Home Premium after using WinXP pro for many years. The primary hard drive is WDC 150 Mg and Win7 is installed and updated to current with SP1. I dropped a second WDC hard drive in, formatted and was going to use it for a 2nd backup unit. Both of these...
Hardware & Devices
Printer shared Win7, but access stopped at the computer.
Hello. My apologies for the vague title, there's not a lot of room to sumarize. Here's the issue: A printer shared on a Windows 7 pc cannot be accessed because the user is stopped when accessing the computer itself. Sound confusing? Allow me to clarify...;) The hosting computer is a...
Network & Sharing
SSD stopped being recognized
Hi, Yesterday i was playing mass effect 3 until i got tired and went to sleep, shutting my computer down on the way. Today, i turned my computer on, and it wouldn't boot. Then after a restart i noticed that my SSD wasn't being recognized by the marvell controller. The bios also won't recognize...
Hardware & Devices
Kodak Photo Printer not recognized as printer
I can't get my new laptop to recognize my old Kodak 500 Photo Printer as a printer. It shows up as a "device" instead, and so I can't print to it. Has anyone else had this problem and found a fix?
Hardware & Devices
External HDD - not recognized after printer install
after installing printer my friends USB HDD is not recognized on his PC when it boots up...but if he reboots the HDD (turns OFF then ON) it works? anyone? thanks
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:40.
Twitter Facebook Google+