New
#1
External USB HDD changed from NTFS to RAW
I have a:
Seagate BarraCuda Green ST1500DL003 1.5TB
5900 RPM 64MB Cache SATA 6.0Gb/s
3.5" Internal Hard Drive Bare Drive
It was formatted as NTFS and partitioned. One partition does not show up at all, a second one shows up as Unallocated with no drive letter, and a third partition shows up as having a drive letter, but with the RAW file system/not NTFS. Below is a "Computer Management" view:
DISK 2 is the drive in question...
Attachment 401901
Some posts here on this topic mentioned possible ways to recover these partitions.
I have Partition Wizard 10.2 with Partition Recovery options. So I opened it up and started a quick scan.
The image below is what I remember the Drive partitions to be except the "Unallocated 472.3GB" Drive should be labeled SOFTWARE.
Attachment 401902
Should I select "Apply" to start this recovery??? Don't want to mess this up. Or should I run the advanced scan first?
Thanks
Wanted to check here before I run this software for a fix.
Last edited by WinDozeUser; 04 Dec 2017 at 11:19.