Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Dynamic partition

28 Dec 2017   #31

Windows 7 HP 64

There is no relation with the Win 7 installation and Win 10. They are on different partitions.
Hope you followed my post #26 instructions and disconnected the data drive (drive 0) before installing win 7.
Boot win 10, open device manager and look if there is any yellow alerts. Special look at network adapters.
For Win 7, open device manager and look if there is any yellow alerts. Use the Asus A88X-Pro disk that came with the MB to install all missing drivers.

My System SpecsSystem Spec
28 Dec 2017   #32

Win 7 x64

This a mess...Win 7 device man. shows ethernet controller,SM Bus controller, (4) universale bus controllers and usb cam.
I am using my very slow Acer notebook,BTW am able to get my network working.only on this pc.,, As for win 10, the drivers disk won't boot, I am able to see it in windows explorer. I tried setup, autorun in the Run command box to no avail. I do have my cd drive as boot #1 in my Bios setup, but won't boot.
My System SpecsSystem Spec
28 Dec 2017   #33

Windows 7 HP 64

Drivers disk aren't boot able. Under windows, insert it on the CD / DVD drive, open Explorer and run setup.
My System SpecsSystem Spec

31 Dec 2017   #34

Win 7 x64

Thanks, I did click on setup and it wouldn't work for some reason and then I read your post, so i tried it again and it did work. Win 7 is just fine and up to date. One curious message i get when I tried to open Win 10. It always opens in safe mode. I have done search on it and tried all options and have not been able to get out of safe i did repair. It did the trick, but now my Cortana has the sound, but it can't hear me or even type in the search box. Aside from that, I found out that i seem to have 2 versions of Win 10. One is corrupt and the other is the one that i am talking about now..and it says its in Volume 2. Needless to say, i do not know where that is by looking at disk manager. I would like to delete it, but hate to think that i may delete the wrong one, even if Cortana doesn't work...and even if I update win 10, it may do it to the corrupt version. I did see both versions shown, one marked default and the other it may be the default one that is corrupt. Win 7 is not even shown this time.I also want to take this moment to thank you for your preserverance in this matter. Happy New Year
My System SpecsSystem Spec

 Dynamic partition

Thread Tools

Similar help and support threads
Thread Forum
Dynamic and basic partition on one physical disk - is this possible?
Hello, I'd like to know whether it is possible to have both dynamic and basic partitions on one physical drive - and if yes, could you tell me how to do it? I tried both searching and doing it myself, but I can't figure out an answer that I'm 100% sure of. Thanks!
Backup and Restore
Dynamic to Basic Partition
Hey Guys.... Any windows expert here I just converted my drive from dynamic to basic bit now I am having problems... 1)Windows take time to start up 2)Pc Hang a lot while opening any folder application etc so what should I do?? Any help appreciated My Pc Specs might help : Processor :...
General Discussion
How can I delete a protected dynamic disc partition
I am running a custom built PC with a 120GB SSD for boot and a 1TB HDD. I accidently made my HDD a dynamic drive and am trying to convert it back to the basic format. To do so i understand I have to delete all of its partitions/volumes I did that successfully for the large 931.41 GB but the other...
Hardware & Devices
Problem with partition, Missing Dynamic
Can anyone guide my in the correct direction to fix the missing dynamic? I want to move all of the unused space to my current c: drive. Any help would be greatly appreciated, thank you.
General Discussion
changing a dynamic partition to a basic partition
hello i have a hp laptap with a core i3 . with 8gig of ram. 500 gig hard drive. i made a 100 gig partion and it went to dynamic i would like some help in changing it back to basic. i read the mini tools application. if i tried that would it erase my hard drive if i went back to basic. all i wanted...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:02.
Twitter Facebook Google+