Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Screen blanks as Win7 starts up after POST then displays normally

14 May 2018   #21
loninappleton

Windows 7 x64 Ultimate
 
 

No rush on this. I've already used the Seagate programs. As mentioned the the response from
the company was helpful but didn't seem at all interested in warranty friendliness for replacement.


My System SpecsSystem Spec
.
14 May 2018   #22
Snick

Win 10 x64, Linux Lite, Win 7 x64, BlackArch, Kali, VMWare Workstation Player, OpenVPN
 
 

Well then, apparently everything you see/read on the Internet isn't true! Who knew!
My System SpecsSystem Spec
4 Weeks Ago   #23
loninappleton

Windows 7 x64 Ultimate
 
 

Quote   Quote: Originally Posted by Snick View Post
Well then, apparently everything you see/read on the Internet isn't true! Who knew!

Well I don't know how to twang on them unless there's some sort of class action.


How we got here from screen blanking I forget.


The old monitor 'flatlined' with a single horizontal element lit up after it stayed on a while. Done.


I was able to get another crt monitor from the local Freecycle group.


But I'm ready at some point to continue with the Seagate now that I have a usable second

rig for testing things. So on to using Victoria with or without Laying down a Simple Volume. That was the last question on here.
My System SpecsSystem Spec
.

2 Weeks Ago   #24
loninappleton

Windows 7 x64 Ultimate
 
 

I have marked this solved. The blanking screen simply completely failed and taken to

the County Recycling Center.


I'm following up on AOMEI since it is recommended by users of Adata SSD which I'd like to get
in the near future.




thanks to all who participated
My System SpecsSystem Spec
Reply

 Screen blanks as Win7 starts up after POST then displays normally




Thread Tools




Similar help and support threads
Thread Forum
win7-64 professional lock screen not blanking multiple displays
Hello, I have been searching on the internet and not finding much other than disabling the ctrl-alt-del lock screen or changing the background for the lock screen, and neither I have an interest. I just got a new lease roll at work, I went from an HP to a Dell running 5 24-inch displays, two...
General Discussion
Screen open and close button displays off the screen
My friend purchased an HP Windows 7 professional 64 bit computer two weeks ago. From the desktop when he clicks on my computer, control panel etc. the screen opens to maximum view. In the upper right-hand corner where the X (close) button and the full screen button is located these buttons...
General Discussion
Screen blanks when network cable pulled
I'm trying to set up a wifi extender. PC has only one enet port. Can't get extender to pair with router via wifi so I connected to the extender with an enet cable. When the cable is disconnected from the router and connected to the extender the screen goes blank and stays that way until the router...
Network & Sharing
Blanks screen on boot from dvd
Hi, I'm trying to install windows 7 professional 32bit on a computer I kinda pieced together for my parents, after my POST screen it just goes blank and I get a blinking white cursor, no "to boot from cd press any key..." or anything after sitting at the blank screen for a minute itll just go to...
Installation & Setup
Screen blanks... "no signal" error
Hi all Hope you can help with this problem... SYSTEM SPECS ASUS P7P55D-E PRO Intel i5-760 with Thermalright MUX-120 cooler Sapphire ATI Radeon HD 5770 graphics card 2 x Corsair DDR3 2GB DIMMs Windows 7 Professional 64 bit
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:51.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App