Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Torx screw size in 2.5" drive coverplate?

15 Jun 2018   #1
teckneeculler

Win7Ultimate
 
 
Torx screw size in 2.5" drive coverplate?

I believe that the star-head screws that fasten down the lid of a 2.5" HDD are Torx, size T7.

Is anyone able to confirm this?

(And yes, I'm aware that removing the top cover will render the drive useless).

TIA


My System SpecsSystem Spec
.
15 Jun 2018   #2
sml156

Microsoft Windows 7 Ultimate 32-bit 7601
 
 

I have had drive's that use not only torx but also hex and Phillips, So it's hard to say.


What are ya after the magnet's, I have quite a few of them they are really really strong for their size.
My System SpecsSystem Spec
15 Jun 2018   #3
Paul Black

7 HP SP1 64-bit Vista HB SP2 32-bit Linux Mint 18.3
 
 

Hi teckneeculler,

I think they probably are without seeing a picture of them.
You can get a pack of 6 [T5 T6 T7 T8 T9 T10] precision Torx screwdrivers from Amazon for about 2.75 [sorry, I don't know where you are!] with FREE postage.

I hope this helps!
My System SpecsSystem Spec
.

15 Jun 2018   #4
mrjimphelps

Linux Mint 18.2 xfce 64-bit (VMWare host) / Windows 8.1 Pro 32-bit (VMWare guest)
 
 

+1 on the assorted pack of Torx screwdrivers. If you are going to disassemble a hard drive, you will need a lot more than just one size of Torx bit.

This one goes all the way down to T2, and includes a lot more than just Torx bits.

Here's another nice toolkit.
My System SpecsSystem Spec
15 Jun 2018   #5
cornemuse

Windows 7 Home Premium bit
 
 

Just checked, WD 2" hdd plate screws are T-7. But like others said, you need a few more sizes for 'complete destruction'!
My System SpecsSystem Spec
15 Jun 2018   #6
teckneeculler

Win7Ultimate
 
 

Thanks for your helpful inputs, everyone.

Yeah, looks like a very small investment in Chinese technology might be in order

Shucks, I have no idea what a T2 must look like. As far as I could tell (without an electron microscope) my T8 is around 2.2mm point to point. While my guestimate of the case screws is around 1.2mm. Which I'm guessing is the T7.
T2 must be miniscule!
My System SpecsSystem Spec
18 Jun 2018   #7
mrjimphelps

Linux Mint 18.2 xfce 64-bit (VMWare host) / Windows 8.1 Pro 32-bit (VMWare guest)
 
 

T4 is the smallest I have ever needed, and that was to completely dismantle a hard drive (just for the fun of it). But it has been several years since I did that; and I'm sure the Ifixit folks do a lot more hardware dismantling than I do.
My System SpecsSystem Spec
Reply

 Torx screw size in 2.5" drive coverplate?




Thread Tools




Similar help and support threads
Thread Forum
Torx Sizes for Hard Disk Drive
Good Day! i just want to ask a simple question because i'm planning to dissect some of my hard drive since it was totally dead. there are two types i have hard drive for DESKTOP PC and for Laptop. my question is what was the sizes of Torx Screwdrivers i need to buy. Desktop HDD Torx Size:...
Hardware & Devices
"Windows Backup size" not reflecting actual backup file size
I'm having a problem with a system image (C: drive and System Reserved drive, that I made with a scheduled Windows Backup) and its size. I have a D: drive where I store it. First of all, I noticed this in D: drive properties: http://i.imgur.com/1ZAmdW2.jpg http://i.imgur.com/P73edVm.jpg ...
Backup and Restore
Power needed for two 2TB hard drive (3.5" size)?
Hello, I bought a dual sata-usb 3.0 adapter, came with 2A power supply, no problem to start with one of the HD however if i plug two of them most of the time it won't start totally (disk starts but one make strange sound cause not enough power to finish initializing)... Of course both drive are...
Hardware & Devices
Best way to expand drive size after "cloning"?
The title I chose was probably not the best, come to think of it. It isn't so much the resizing part of this process as it is all the rest of it that I seem to be having problems with. Okay, first of all I need to specify that I'm just an average user when it comes to Win7 and hardware nitty...
Backup and Restore
What's the diffrent between "size" and "size on Disk"?
Hello! When i check folders properties i can see this "Size" and "Size on Disk". Both fields are show same amount so what is the different between that?:cry: http://www.freeimagehosting.net/uploads/d7720bb2e2.png
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:22.
Twitter Facebook Google+