Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Less than half of my memory is available

21 Jul 2018   #1
Marscaleb

Windows 7 Professional 64-bit
 
 
Less than half of my memory is available

I've been trying to track down an issue with my computer randomly resetting, and while checking for problems in my memory, I noticed that while I have 32 GB installed in my machine, in my system properties it says I have 32 GB installed but only 16 GB usable.
I don't recall it saying this before, but it has been a long time since I've bothered to look if I have all my RAM.

I was looking around online, and I see people asking about this phenomenon, and being told that the hardware is reserving portions of the memory. That may be fine and dandy if I only lost a couple gigs, but this is literally HALF of the memory on my machine.

What gives?

But now I've come across something that is even more bothersome, but may give a clue as to what is going on.
I was testing my RAM to see if there was a hardware issue leading to my random resets. (I ran the memory diagnostic twice and it came up clean, but maybe its hardware anyway.) I pulled out half of my RAM to just 16 GB. I noticed that the system no longer said that only part of my memory was usable. The next day, I swapped out the DIMMS again, this time only using the RAM I pulled out the day before.
NOW my system says I have 16 GB installed BUT only 7.96 is usable. Now I have less than half of my memory available!

Now I want to say that this means I clearly have a physical problem with one or more of my RAM DIMMS, but the math doesn't add up.
If there was a straight-up problem with the memory, wouldn't the same amount be unusable? Why would I lose 16 GB when all four are installed, but only lose 8.04 when just two are installed? And why would the memory diagnostic not find any problems?

Other information:
-All of my DIMMS are the exact same brand and model.
-When I tried running the RAM with just 16 GB, in both configurations I used the same slots on my motherboard. The manual states that if I use only two slots, those are the two slots I should use.
-I tried re-seating all of my RAM last week, trying to solve a completely different issue (which is now resolved.) Before then, I had never touched my RAM since I built the computer a couple years back. It was after doing this that I began to have the problem of the computer randomly resetting.
-It was after re-seating my RAM that I noticed I had only 16 GB usable.
-When I re-seated the RAM I intentionally put them all back in different slots, just to maximize the effect of re-seating.


My System SpecsSystem Spec
.
22 Jul 2018   #2
F22 Simpilot

Windows 7 Ultimate x64
 
 

So if I'm to understand this right. No matter what slot you use the RAM only shows half the amount?

What did you do prior to the RAM having this issue?

Is the XMP profile set in BIOS?

What tool did you use to test the RAM? I use Memtest x86+

My verdict thus far is either faulty RAM sticks. Meaning you have to test one at a time. Or the motherboard.

Finally, it may not matter, but is your RAM listed with the MOBO's QVL list? I always buy my RAM that's tested to be compatible with my motherboard. You may not have to follow that, but I do anyway to guard against any issues and what not and I just HATE doing returns.
My System SpecsSystem Spec
22 Jul 2018   #3
Megahertz07

Windows 7 HP 64
 
 

How many RAM sticks you have?
What is the brand and model of your MoBo?

I've seen this happening on MoBo with memory that wasn't qualified (chipset).
My System SpecsSystem Spec
.

22 Jul 2018   #4
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64
 
 

Exactly what motherboard are you using??


Jack
My System SpecsSystem Spec
23 Jul 2018   #5
Marscaleb

Windows 7 Professional 64-bit
 
 

I've been testing the sticks individually. I found one particular one that, if it is the only one in there, the computer will not boot with. I've left it out and I no longer have any statements from the system that only so much of the memory is usable.
So I guess that one stick is the problem.
Why it can reduce the performance of the rest of the RAM is beyond me.

In answer to the other questions, I am running an ASRock 970. This is the RAM I was using. I had four sticks of 8 GB each for 32 GB total. Now I'm just running 3 with 24 GB total.
The memory diagnostic tool I was using was the one that comes with windows.
My System SpecsSystem Spec
26 Jul 2018   #6
mrjimphelps

Linux Mint 18.2 xfce 64-bit (VMWare host) / Windows 8.1 Pro 32-bit (VMWare guest)
 
 

You've found the problem -- replace that one RAM stick, and you'll be back in business with 32 GB of RAM. Or just go with 24 GB.

As for why it caused other memory not to be available, perhaps it caused a conflict with that memory. At any rate, you have definitely identified the cause of the problem -- that one RAM stick.
My System SpecsSystem Spec
26 Jul 2018   #7
Megahertz07

Windows 7 HP 64
 
 

In a dual channel, bytes are split and sent half to a stick and half to the other, similar to a RAID 0.
I think that one bad memory stick can make the other (in dual channel) not to work.
My System SpecsSystem Spec
Reply

 Less than half of my memory is available




Thread Tools




Similar help and support threads
Thread Forum
Half of memory is not usable - Please help me understand where it is
So here is the short story: I have 4GB of Ram (2x2GB Gskill Ripjaw series) installed. Yet, Ubuntu only recognizes 2GB, Windows recognizes that 4GB is installed, but only 1.99 useable, and the BIOS says that there is 4GB installed. On Windows, running idle, over 1GB of RAM is being used, leaving...
Performance & Maintenance
Comp only showing half memory
Hi I was trying to redistribute my memory on my MSI laptop, so I downloaded Paragon Partition Manager and set it to run, unfortunately the comp crashed part the way through and I was unable to reload windows, i kept asking for a recovery disc which I didn't have, so I ran the recovery on the start...
General Discussion
Windows wont use over half of my memory
Hello all I just ordered and built my new custom PC a few days ago i have 8 gigs of Gskil ram in it and it shows that it can read it but it only is allowing 3.55 to be used. i checkd the MSconfig to make sure the max ram box isn't checked. i have read before that some of your parts will use...
Hardware & Devices
Only half my memory being used
Hey guys, I just upgraded my mainboard (and processor/memory etc) due to my old mainboard having a its SATA2 controller fried. So I set out to go and buy some of this new stuff and I ended up with: ASRock P55 pro mainboard QuadCore Intel i5 750 4GB of ram (2x 2GB) Now obviously this is dual...
Hardware & Devices
Memory shows half the value installed
Hello everyone, I have this issue that no matter how much ram i have installed it only shows half on my Windows 7 64 bit system. when i bought it it had 4gb installed, but i could only use 1.99, so i installed 2GB more from my old computer(which had DDR3 ram as well) but now it shows 2.99...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:43.
Twitter Facebook Google+