Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Possible motherboard failure

11 Aug 2018   #1
Mickyd

Windows 7 & Windows 8.1
 
 
Possible motherboard failure

HI
Yesterday the power went off in my sisters house, since then my nephews PC wont turn on i had a look this morning and the fans, motherboard and graphics card lights are coming on but the PC itself isnt coming on - i suspect it could be the motherboard but i thought i would ask if it could be soming less costly

Thanks in advance

Micky


My System SpecsSystem Spec
.
11 Aug 2018   #2
samuria

win 8 32 bit
 
 

Not coming on how no display? It's possible it's just graphic card problem can you try another display adapter. Have you cleared the CMOS that may kick it back to life
My System SpecsSystem Spec
11 Aug 2018   #3
Mellon Head

Win 7 Pro x64/Win 10 Pro x64 dual boot
 
 

It could also be that one of the rails in the PSU was damaged by a power surge. It might be worth trying to swap out a supply temporarily, if you have a spare, or can get access to one.
My System SpecsSystem Spec
.

11 Aug 2018   #4
Megahertz07

Windows 7 HP 64
 
 

Take the power cable from the wall outlet, wait 1 minute and try to power on again.
My System SpecsSystem Spec
11 Aug 2018   #5
F22 Simpilot

Windows 7 Ultimate x64
 
 

I've read countless threads from other computer forums of people having the same issue when the power goes out so that's why I bought an UPS. It set me back around $130, but it's well worth it. It's this one right here: CyberPower CP850PFCLCD UPS 850VA / 510W PFC compatible Pure sine wave - Newegg.com

I think the vast majority of people who had this problem came to the conclusion it was the motherboard. A new PSU could rule it out though. What type of PSU is in there now? If it's a cheap off brand one then chances are the motherboard has been damaged.
My System SpecsSystem Spec
11 Aug 2018   #6
Megahertz07

Windows 7 HP 64
 
 

There are inductance on the distribution lines and they are under load. When you have a power failure it means that a circuit has been open the inductance generates voltage spikes. @Mellon Head is right to say that, maybe, the PSU was damaged by a power surge.
Take the power cable from the wall outlet, wait 1 minute and try to power on again.
My System SpecsSystem Spec
14 Aug 2018   #7
SnakeFist

Windows 7 Ultimate x64 SP1
 
 

Some motherboards like mine have built in protection. And when the voltage gets to high it trips it to protect the motherboard. Resetting the bios resets the surge protection on the motherboard.
My System SpecsSystem Spec
Reply

 Possible motherboard failure




Thread Tools




Similar help and support threads
Thread Forum
Have I a motherboard failure?
It was working okay last time I used it! How often has anybody said that? When I switched on my PC it would only boot as far as BIOS setup --- until I removed the microsoft mouse wireless dongle. Then Windows started although the initial screen 'Starting Windows' had corrupted text. Word runs...
Installation & Setup
Motherboard failure. Can I reinstall Win 7 to new PC?
My parents computer has died and after carrying out some tests I believe the MB has died. The board, cpu and memory are now a bit dated and having looked at replacing the MB I am unable to find one of the same spec. By far the easiest option is to buy a new base unit but this would come without...
Installation & Setup
Motherboard USB Failure?
Hello everyone, i'm new to this all so if some of my stuff comes off non-understandable just let me know and i'll try to make sense of it. Basically my problem is yesterday while using my USB mouse I was going to add a song to my brother's Droid. He plugged in his USB connector with his phone...
Hardware & Devices
motherboard failure
so my motherboard failed on my home nuild system i had built this a while ago it is a msi p45 neo motherboard with 8gb ddr2 corasair ram itb seagate hard drive pny video card dual core 8400 processor i changed the battery n the video card still the board would not rspond so i have an old...
Installation & Setup
Motherboard failure
I have two machines I will name comp1 & comp2 Comp1 is my main machine with all my stuff on it. comp2 is for emergencies such as just happened & the one I'm using now. I had my MB go out recently on comp1 so I have a few questions on what to do. I pulled the HDD from comp1 & installed it as an...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:26.
Twitter Facebook Google+