[STUCK] SAMSUNG MAGICIAN 5.3 Stuck on scanning for drive information

Hello, I've problem and I want to ask, is there anyone have experienced SAMSUNG MAGICIAN Stuck on scanning for drive information? I want to trim and enable rapid mode, but the samsung magician software can run, even it's not even opening the interface, only stuck on waiting loop animation. Mine is 5.3, just reinstall from 5.2, I done it because facing this problem without luck. Maybe anyone could help me on this matter. Thanks :)
It's the interface I'm talking about. Please.. Thanks

Based on your system specs, you don't have a Samsung drive. In addition, both of your drives are hard drives, not SSD.

wither 2 said:

Based on your system specs, you don't have a Samsung drive. In addition, both of your drives are hard drives, not SSD.

Oh sorry, I just change my laptop to SSD but I have not change my laptop specs. My laptop now using 1TB Samsung SSD 860 EVO MZ-76P1T0BW. It's working perfectly, but today I can't run the magician software, it just sit there do nothing and the rapid mode isn't working anymore..

Are you using a brand new drive? I don't know if it's still true but Magician originally didn't work with a OEM drive and may not work with a reburished drive, depending on it's origin.

You might also go here-

Samsung NVMe SSD 960 EVO | Samsung V-NAND SSD | Samsung Semiconductor Global Website

and download/install the NVME driver, even if you don't have NVME or the 960 evo.

If it's a new drive, you can also address this problem with Samsung.

wither 2 said:

Are you using a brand new drive? I don't know if it's still true but Magician originally didn't work with a OEM drive and may not work with a reburished drive, depending on it's origin.

You might also go here-

Samsung NVMe SSD 960 EVO | Samsung V-NAND SSD | Samsung Semiconductor Global Website

and download/install the NVME driver, even if you don't have NVME or the 960 evo.

If it's a new drive, you can also address this problem with Samsung.

Yes I'm buying new drive and it's registered on samsung wesbite, I just check it to make sure. When first I buy it, it's says it's genuine(on magician), so it should be.

I tried to uninstall the november update without luck. It's still there doing nothing. I'm really-really curious, I want to debug the app but no error log shown on event viewer, I just look at it's behavior that it only run the waitinghelper.exe with system privilege, and it's sit there forever..

Any other ideas maybe? I hope it's not clean install of the windows 7.. I hate when it comes to that conclusion...

I don't know what "november update" you're referring to.

Where did you buy the drive?

Did you install the NVME driver?

If you go to Control Panel, Device manager, Disk Drives and select the SSD, what happens is you run the Update Driver under Driver?

Glad you resolved it. If you haven't, mark the thread is solved.