Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: USB Kodak is recognize by Windows and then it disconnects

1 Week Ago   #1
yleyvag

Windows 7 Ultimate x32
 
 
USB Kodak is recognize by Windows and then it disconnects

I have two Kodak brand USB devices, they work in Windows 10 but in Windows 7 they do not. When I connect it to the computer it works correctly, the device is detected, Windows shows the capacity and a second later the memory is put in 0 bytes and disappears. That only happens with Windows 7, with Windows 10 without problems. I did the test on two Windows 7 computers, in both the same behavior.


My System SpecsSystem Spec
.
1 Week Ago   #2
wither 2

Windows 7 Pro SP1 64 bit
 
 

Hi yleyvag-

What exactly are the devices and what are their model numbers?
My System SpecsSystem Spec
Reply

 USB Kodak is recognize by Windows and then it disconnects




Thread Tools




Similar help and support threads
Thread Forum
Kodak Easyshare
Hi I seem unable to get Kodak Easyshare software working on my 32 bit Win 7 system. The version installed is the latest from the Kodak site, but gives me a "Kodak Easyshare Software has stopped working" error message, whenever I load images into it. I really would like to get it working as its...
Software
Kodak Camera Not Recognised by Windows 7...
Hey all I can't get my Kodak Camera DX4530 to be recognised properly by Windows 7, when I connect it up windows attempted to install drivers but fails.....any suggestions please? I installed Kodak Easyshare Software but it made no difference :( Thanks in advance
Software
Anyone got a Kodak Zi8?
Hi, today I bought a Kodak Zi8 camera and I'm just wondering if it is safe to use the attached USB on a PC. I wonder because the USB slots are off the ground and therefore when I plug the camera in it has its full weight resting on what seems a quite flimsy USB connection. In the manual it is...
Chillout Room
Help w/Kodak AiO Printer
I have a laptop running Windows 7 (64 bit) and I cannot get my Kodak 5100 AiO printer to work. I have downloaded the latest software from the kodak website and downloaded the latest firmware but programs such as notepad, paint or word will not print. The only thing I can get to print is a...
Hardware & Devices
Kodak All In One
Anyone using Kodak AIO Home Center? It loads fine, creates the printer and sets it as default. The Home Center seems to work well but doesn't actually print anything, printing from applications crashed explorer and/or the application. I've tried setting it up in compatibility mode.
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:38.
Twitter Facebook Google+