New
#1
USB Controller Error under Other Devices
Greetings, trying to pin this one down. This is after a fresh rebuild, using existing W/7 install on ssd transferred to new build. New(er) components as follows;
MSI 990fxa motherboard & 16 gigs Balistix
AMD fx-9590 Vishera processor
Previous board was Gigabyte ddr2 system, usb2 only with AMD Phenom II processor.
MSI board has latest bios, all current drivers for it (w/7 x64) downloaded & installed except for raid jazz.
Under Management, Universal serial bus controllers - zero errors. However under Other Devices, Universal Serial Bus (USB) Controller error is listed. Details under General Tab:
Device Type: Other Devices
Manufacturer: Unknown
Location: PCI bus 5, device 0, function 0
----
The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.
To find a driver for this device, click Update Driver.
My first thoughts were, some leftover nonsense from the prior build. Listed under USB controllers all drivers appear installed and are functioning correctly. Please see attached image. All USB ports tested. Hesitant to delete / remove this but the system seems fluid otherwise. Any advice would be appreciated.
Quote