Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 Pro OS Mirror after restart secondary plex failed redundancy

1 Week Ago   #1
ljgrncnmi12

Windows 7 Professional 64Bit
 
 
Windows 7 Pro OS Mirror after restart secondary plex failed redundancy

Hi to all,

I mirrored my windows 7 pro OS using disk management but every time I restart my computer the secondary plex is failed redundancy I need to reactivate and wait to resynch. I already called microsoft but they said they don't give support to those type of issue.


My System SpecsSystem Spec
.
1 Week Ago   #2
Paul Black

[1] Win 7 HP SP1 64-bit [2] Vista HB SP2 32-bit [3] Linux Mint 18.3
 
 

Hi ljgrncnmi12,

Quote   Quote: Originally Posted by ljgrncnmi12 View Post
I mirrored my windows 7 pro OS using disk management but every time I restart my computer the secondary plex is failed redundancy I need to reactivate and wait to resynch. I already called microsoft but they said they don't give support to those type of issue.
Have you tried posting your issue here => Plex Forum.

I hope this helps!
My System SpecsSystem Spec
Reply

 Windows 7 Pro OS Mirror after restart secondary plex failed redundancy




Thread Tools




Similar help and support threads
Thread Forum
Broken Windows mirror. How do I restore disk mirror?
Started with Windows and apps successfully running on Disk 0 (1TB Seagate). Bought an exact duplicate HDD, recognized as Disk 1. Followed instructions and used Windows Disk Manager to convert Disk 0 to Dynamic, and configured as a mirror with Disk 1. Everything still worked perfectly. Physically...
Installation & Setup
Windows Failed to restart after updates
I have a lot of updates that are failing. Even if they succeed my computer fails to restart & runs in an endless loop restart- startup repair-unable to automatically repair this computer. I have to boot from the installation disc-format c drive-reinstall everything. Then, within a couple of weeks...
General Discussion
How do I break failed software RAID1(mirror) in Windows 7?
I want to break a software RAID1(mirror) in Windows 7, without losing the data on any of the two HDDs. One of them has developed some weak sectors and I want to compare the data on both of them. As you can see in the attached image, it says Errors under Disk1, and Online under Disk2. The...
General Discussion
Windows failed to boot up but then did on restart.
Hello, about an hour ago, I ran the Windows Memory Diagnostic test on my laptop (I was in Windows, chose to run it fsr and let the computer reboot). It went through both passes with no errors. It then went to boot up Windows 7...and just didn't do it. It hanged on the "Starting up Windows..."...
BSOD Help and Support
Windows 7 won't restart (The NDSPCIIO service failed)
Hello, Newbie here and I can't figure out why windows 7 hangs when I try to restart -- always have to shut down and then turn the machine on again.:( Event viewer gives 7000 error code The NDSPCIIO service failed to start, system can't find specified file. No other errors noted. When I...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:25.
Twitter Facebook