Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Upgrade DDR3 RAM on Asrock N68C-S UCC before reinstalling W7

4 Weeks Ago   #1
FrankZito

Windows 7, 64bit
 
 
Upgrade DDR3 RAM on Asrock N68C-S UCC before reinstalling W7

Hello,

I want to upgrade my Asrock N68C-S UCC from 2 gb to 4 gb DDR3 Ram and I'm not quite shure if the RAM I have here is compatible with it.
At the moment the N68C-S UCC has 1x 1 GB DDR3 1333(9) 1 GX8 (VD3U1333B1G9-B) and 1x 1 GB 240 PIN DIMM 128 MX 64 DDR3 (RM12864BA13398FF)

I want to remove those and insert 2x 2 GB 1Rx8 PC 3 - 10600 U - 9 - 10 - A0 (HMT325U6BFR8C - H9 N0 AA 1027)

Would that be compatible or will that destroy the board and I should get other RAM instead ?

Thanks in advance for your help

regards
-Frank


My System SpecsSystem Spec
.
4 Weeks Ago   #2
iko22

Windows 7 x64, Vista x64, 8.1 smartphone
 
 

Hello FrankZito,

What CPU are you using? If you are using AM3 CPU, then a matched HMT325U6BFR8C pair would be compatible. They are specified to draw 1.5V, the same as the DDR3 specification.

It is unnecessary to re-install Windows 7 after a RAM upgrade. Your present Windows instillation will automatically configure when it detects the new RAM sticks.
My System SpecsSystem Spec
4 Weeks Ago   #3
FrankZito

Windows 7, 64bit
 
 

I'm using a AMD Athlon II X2 250

thank you
My System SpecsSystem Spec
.

4 Weeks Ago   #4
iko22

Windows 7 x64, Vista x64, 8.1 smartphone
 
 

The AMD Athlon II X2 250 is a Socket AM3 processor. All AM3 socket processors were designed with the memory controller integrated into the CPU.

That means, when you install RAM, the RAM must match the capabilities of the AM3 memory controller.
Since the AMD Athlon II X2 250 is a socket AM3 CPU, then the RAM you have already chosen is a good match. Hence, this RAM is suitable for your computer.
My System SpecsSystem Spec
3 Weeks Ago   #5
Vineet Garg

Windows 7 Ultimate x32 With Sp1 + Vista Ultimate x32 with Sp1 & Sp2 !!
 
 

Or refer your MB Documentation/Report for other alternatives: https://www.asrock.com/mb/memory/N68C-S%20UCC.pdf

Thanks & Regards. ...
My System SpecsSystem Spec
Reply

 Upgrade DDR3 RAM on Asrock N68C-S UCC before reinstalling W7




Thread Tools




Similar help and support threads
Thread Forum
ASROCK n68c-gsfx FX6300 overlock
HELLO to everyone! i tried to overclock FX6300 from 3.5Ghz to 4.0-4.4,but everytime i try to run Prime95 to stress,everything froze or WIn10 "BSOD" and restart,i only play around with multiplier,on this PC i have asrock n68c-gsfx(i know it's not very good for OC) i wrote everything i found on...
PC Custom Builds and Overclocking
Will an AMD FX-6300 work with an AsRock N68C-GS FX
Hi All, As the title says, will an AMD FX-6300 processor work with an ASRock > N68C-GS FX motherboard? I'm planning to upgrade my system due to FPS drops whilst playing DOTA 2. I've concluded that since the FPS drops happen after several minutes while playing and seem to have nothing to do...
Hardware & Devices
ASRock N68C-GS FX Network controller driver
Hi folks, I have fresh installatioin of Windows 7 Ultimate SP 1 x32 edition running on my PC. When I go to Device Manager I see that my Network Controller drivers are not properly installed. My network card is also listed as beeing Nvidia nForce Network Controller which is incorrect. After...
Drivers
Asrock h61-vg4 (ivy bridge & ddr3 1600 / sandy bridge & ddr 1333)
Hi all, Just wanted to post this for anyone experiencing boot issues with the ASROCK H61-VG4. SPEC ASROCK H61-VG4 Celeron G1620(P0) Ivy Bridge 2.7GHz (1155 IVYBRIDGE / CHIPSET) RAM 4GB 1333MHz 1TB Samsung spinpoint F3
Hardware & Devices
Restart issues with new motherboard Asrock N68C-S UCC
Hey guys, I am new to the forum, just signed up. To start things off I wanna ask if any of you have any experience with the Asrock N68C-S UCC motherboard or ever had to deal with a restart issue I'm facing with the Asrock N68C-S UCC. I just did a clean install after replacing my old ASUS...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:51.
Twitter Facebook