Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: What determines partition type when formatting?

4 Weeks Ago   #1
Replicanti

Windows 7 Enterprise x64
 
 
What determines partition type when formatting?

I work with a legacy device that does not recognize USB dongles formatted as FAT32 with LBA(partition type 0x0C). It only works with normal FAT32 with CHS(partition type 0x0B).


Most of the USB dongles I use are 4 GB, and they always get formatted as normal FAT32(0x0B) when i use the built-in Windows formatting tool. Recently I got a 16 GB USB dongle which after formatting ended up with partition type 0x0C. I also tested an 8 GB one, which correctly ended up with partition type 0x0B.


Does anyone know how the formatting tool determines which partition type to use? Does it depend on the size of the USB dongle, or some other hardware detail? I've been researching this via Google for a while now, but haven't been able to find any good info..



I know it is possible to change the partition type using the diskpart tool, but I am specifically trying to find USB dongles that end up with partition type 0x0B without any fuss.


Thanks in advance for any help!


My System SpecsSystem Spec
.
4 Weeks Ago   #2
samuria

win 8 32 bit
 
 

Welcome to the forum. You can set partition type and format what you want normally USB drives will often come preformatted so it's simple for people.you can re partition and format at any time.
My System SpecsSystem Spec
4 Weeks Ago   #3
dg1261

Windows 7/8.1/10 multiboot
 
 

Partition sizes were limited to 8GB under CHS addressing. Due to register size limitations, the values could range from C=0-1023, H=0-255, S=1-63. At 512 bytes/sector, that calculates out to a disk size of 1024*256*63*512, or about 8GB.

In an MBR-type partition table, partition size is expressed in both CHS and LBA terms, but when the partition is larger than 8GB the CHS values are "pegged" at their maximum values. The partition-type indicator of 0x0C is a flag telling the system and utilities to ignore the CHS values and use the LBA values instead.

It sounds like your legacy device is so old it only knows about the CHS registers of the partition table and not the LBA registers.
My System SpecsSystem Spec
.

Reply

 What determines partition type when formatting?




Thread Tools




Similar help and support threads
Thread Forum
Credential Mgr- What determines persistence?
How is or what determines whether a credentials persistence is "Enterprise" or "Logon Session"? Is there a way to change persistence? I have several users who continually have to enter their password in Outlook(2007 or 2010) when first started. The only difference(that I can see) between the...
General Discussion
Partition without Formatting
Greetings all. Is it necessary to format a disk before creating a partition on it? I just reorganized my storage and backup scheme which involved wiping (secure erase) three hard drives then creating partitions on them. All three were formatted as NTFS before the wiping but I did not actually...
Hardware & Devices
Partition Formatting Itself???
I left my computer on overnight, woke up. I couldn't find my D drive. I checking Disk management, the partition was formatted and only a new volume could be created out of the space that was once my media partition. How does this happen? Virus? Malfunctioning HDD? Thanks for all replies.
Hardware & Devices
How IE8 Determines Document Mode
More...
News
Formatting partition with win xp
Greetings, I'm using Win 7 as my primary system for some time and it turns out, that I don't need xp anymore. However when I try to format partition on which XP is installed I got "windows was unable to complete the format" message. Any hints how to do this would be appreciated.
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:52.
Twitter Facebook