New
#1
USB Device not Entering Suspend
I have an issue where the USB devices wont suspend.
When I was beta testing Windows 7 usb suspending worked fine. I would notice the light on my usb microphone would go out and then come back on when I went to use it.
Now with the Final version of Windows 7 I can't get the USB device to suspend. I have made sure it is enable in the control panel. I then ran an energy report and got this.
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Composite Device Host Controller ID PCI\VEN_1002&DEV_4396 Host Controller Location PCI bus 0, device 18, function 2 Device ID USB\VID_05AC&PID_0220 Port Path 4,2
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Root Hub Host Controller ID PCI\VEN_1002&DEV_4396 Host Controller Location PCI bus 0, device 18, function 2 Device ID USB\VID_1002&PID_4396 Port Path
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Root Hub Host Controller ID PCI\VEN_1002&DEV_4398 Host Controller Location PCI bus 0, device 18, function 1 Device ID USB\VID_1002&PID_4398 Port Path
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name Generic USB Hub Host Controller ID PCI\VEN_1002&DEV_4396 Host Controller Location PCI bus 0, device 18, function 2 Device ID USB\VID_05E3&PID_0608 Port Path 5,4
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name Generic USB Hub Host Controller ID PCI\VEN_1002&DEV_4396 Host Controller Location PCI bus 0, device 18, function 2 Device ID USB\VID_05AC&PID_1006 Port Path 4
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name Generic USB Hub Host Controller ID PCI\VEN_1002&DEV_4396 Host Controller Location PCI bus 0, device 18, function 2 Device ID USB\VID_05E3&PID_0608 Port Path 5
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Mass Storage Device Host Controller ID PCI\VEN_1002&DEV_4396 Host Controller Location PCI bus 0, device 18, function 2 Device ID USB\VID_0781&PID_A7C1 Port Path 5,2
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Composite Device Host Controller ID PCI\VEN_1002&DEV_4398 Host Controller Location PCI bus 0, device 18, function 1 Device ID USB\VID_17A0&PID_0002 Port Path 3
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name Generic Bluetooth Radio Host Controller ID PCI\VEN_1002&DEV_4396 Host Controller Location PCI bus 0, device 18, function 2 Device ID USB\VID_0A12&PID_0001 Port Path 5,4,4 Reason This Bluetooth USB device does not support selective suspend because it is not remote wake capable.