Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: eVGA 750i FTW motherboard -> no USB ports are working

03 Feb 2010   #11

Windows 7 Professional x64

Quote   Quote: Originally Posted by nate42nd View Post
Looks like eVGA may have a little problem. If you have one of the boards it's a big problem.

All the best Jeff, if I find anything I will let you know.
Thanks for your help Nate.

Yeah it does look like eVGA has a problem... I have the 750i FTW motherboard...

My System SpecsSystem Spec
04 Feb 2010   #12

Windows 7 Professional x64

Hello All,

Hope you can help me before I re-install Windows 7 and see if that fixes my problem...

I am in the System Info -> Software Environment -> System Drivers

The following are not started:

USBCCGP - Microsoft USB Generic Parent Driver - Started: No
USBCIR - eHome Infrared Receiver (USBCIR) - Started: No
USBPRINT - Microsoft USB Printer Class - Started: No
USBSTOR - USB Mass Storage Driver - Started: No
USBUHCI - Microsoft USB Universal Host Controller Miniport Driver - Started: No

Please advise on if these should be started and how one (myself) would start these...

Oh I checked the registry to see if they are started and the value are '3' and started... "supposedly"


My System SpecsSystem Spec
14 Jul 2010   #13

Windows 7 Professional x64

Update: Windows 7 was installed and no error messages but no USB ports work on the motherboard.

Problem was not fixed but I'm using a PCI USB card until I get a new motherboard.

My System SpecsSystem Spec


 eVGA 750i FTW motherboard -> no USB ports are working

Thread Tools

Similar help and support threads
Thread Forum
After new motherboard install - usb ports - dvd drive; ect not working
I am an absolute newby at this , so my apologies in advance, if I did stupid things - I google and do what people had found to work in the past. FYI: got all the drivers from the Acer website and installed them - there is no exclamation marks in device manager, all drivers installed and working...
Need recommendations on ram sticks for nForce 750i SLI motherboard.
Just like title says, I need help on what ram sticks to buy for my nFORCE Motherboard 750i SLI. I originally had 4*2gb ddr2-800 ADATA ram sticks that lasted me a few years. One of the sticks has gone bad so i'm planning to buy a brand new set of ram sticks that are better or maybe another same set...
General Discussion
Built in motherboard video ports not working?
Hello. Currently i have a dual monitor setup with my GTX 570. Both monitors connected to the videocard. When i connect a third monitor to the motherboard it doesnt find it. Is this supposed to happen or is there a problem with my hardware?
Graphic Cards
Motherboard's rear USB 3.0 ports not working
Hello, My new motherboard's USB 3.0 ports do not work. Its a new FM2 socket motherboard: ASRock FM2A75M-DGS I'm ok with computers, but... In my 'Device Manager' (see attachment under "other devices") it says there is no drivers installed. I cant find any 3.0 drivers at ASRock's website ...
Hardware & Devices
USB 3.0 ports not working on Gigabyte GA-A75M-UD2H motherboard
Can't figure out why they are out. Upgraded the bios from F4 to F5 and no effect. Can't see any devices that I plug into these ports. Never liked the transfer rate on these ports when they were working. Very slow - like a standard USB port. Thanks
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 07:21.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App