Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Hard drive *invisible* to Windows 7

11 Feb 2010   #1

Windows 7
Hard drive *invisible* to Windows 7

I created a system image backup copy of my recent Windows 7 installation (including all programs and files) on an external 500GB USB-harddrive using the Windows 7 built-in *Backup and Restore* utility.
I also created a system repair disc using the same Windows 7 tool (found under Control Panel -> Backup and Restore).
These two activities seemed to work exactly as expected.

To test the restore process I took another (no OS on it, empty, in working condition) harddrive (same size, same manufacturer, but different model) and put it into my computer.

I then booted to the CD drive, with my previously created repair CD in it.

After that copies some files into RAM, I would expect to be able to restore my computer from the image on my external harddrive to the empty new internal harddrive.

That doesn't work, though - because the new (empty) harddrive is not even visible
in Windows.

I checked in BIOS - the drive is visible there perfectly.

Just not in that *mini*Windows 7 from the repair CD.

Any ideas?

My System SpecsSystem Spec
11 Feb 2010   #2


possibly the following: New (different) hard drive = new (different) driver set. Your current installation has record of those drivers being installed on the 'other' hard drive and therefore has those drivers set to load... If you want that os to load on a different hardware setup (yes, even hard drives) you should sysprep the install then "back it up" with your favorite imaging software.
My System SpecsSystem Spec
11 Feb 2010   #3


I analogize I don't want to boot a restore disk to test this, if I did I'd try:
run, cmd.exe, diskpart, list disk. I would expect the drive to show up there, if so
1. "select disk X" (where x is the number for the empty drive)
2. "clean"
3. "create partition primary"
4. "select partion 1"
5. "active"
6. "format fs=ntfs quick"
7. "assign"
8. "exit"
exit the console window
The drive should be available
My System SpecsSystem Spec

12 Feb 2010   #4

Windows 7

thank you for your replies.
I was able to solve my problem last night.

Here's how:

I hooked the new (empty, invisible) hard drive up to a running Windows 7 on a different computer - temporarily unplugged the DVD drive, plugged that 'invisible' harddrive onto the (now free) SATA cable for the DVD drive.

Then I used Windows 7's Disk Management to format the entire 80GB as one NTFS partition.

After that my test restore from image worked like a charm.

What did we learn from this:
you still need a computer to fix a computer
My System SpecsSystem Spec
12 Feb 2010   #5

Windows® 8 Pro (64-bit)

This is what exactly happened with me. So I booted my PC from live Ubuntu Cd and formatted the entire disk and then installed Windows 7 again. It worked.
My System SpecsSystem Spec

 Hard drive *invisible* to Windows 7

Thread Tools

Similar help and support threads
Thread Forum
Invisible BSOD on computer wake after long periods - Hard reset needed
Hi there, So in April I decided to go all in on an Alienware 18 which I use for business and pleasure. After a couple weeks I started noticing the computer would not wake from sleep during extended times such as over night. I would simply close the lid at night and open it in the morning where...
BSOD Help and Support
Data transfer from Windows 7 hard drive to Windows 8.1 Hard drive
Hi everyone! There's really no short way to explain my issue and though I tried, please bear with me! My old laptop that I've had for about 6 years now finally bit the dust (nothing lasts forever, right?) It was an eMachines E527 series with a 64-bit OS Windows 7 (I believe with Vista) and...
General Discussion
What is the invisible Boot folder on a non-OS drive?
Earlier I ran Windows on a SSD and used two IDE drives in RAID 1 (hardware). Windows began to blue screen and in my attempts to figure out why, I decided to switch from hardware raid to software raid (both to figure out if the raid was the issue, as well as having read that software raid is...
General Discussion
"Disk error" invisible except to event viewer, when imaging hard drive
My Windows 7 configuration is relatively bullet proof (ha ha, nervous laughter). My OS and programs are on C, which I image using RDriveImage every month after Patch Tuesday. My data is on software-mirrored D/F drives. So as long as I don't have a catastrophic event affecting my computer,...
Hardware & Devices
Invisible Hard Drive
I have two hard drives. I've been running Win7 x32. Tonight I installed Win7x64. I installed it by mistake on my data drive. No problem running it. I can see both hard drives when I look in System or in Computer Management but not in Devices and not when I open Computer. In Computer Management...
Hardware & Devices
Invisible Hard Drive
When i tried to reformat my computer via a clean windows 7 install, the windows 7 installer couldn't see any drives to install to. So, I dug through the settings a little bit and found that my computer can't see my harddrive either. This is particularly bizarre since the computer works. I can see...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:26.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App