Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: mobo beep code

17 Feb 2010   #1
bassfisher6522

Windows 7 Ultimate 64 bit
 
 
mobo beep code

I just realized that I get this one short beep right after I push the power button to turn on my machine. Then it boots up and runs just fine. After looking back through my A+ Managing and Trouble shooting PC book and found out that it's normal to here one or two short beeps that informs me that all is well. I don't remember hearing any beeps on my retail PC's on boot up. Is it me or is something wrong.


My System SpecsSystem Spec
.
17 Feb 2010   #2
Frostmourne

Windows 7 Ultimate x86-64
 
 

Look in the back of your motherboard's brochure for details or Upgrading and Repairing PC's 19th Edition. It should be OK, but my mobo had no speaker to hook up so no beeps.
My System SpecsSystem Spec
17 Feb 2010   #3
bassfisher6522

Windows 7 Ultimate 64 bit
 
 

Theres nothing in my mobo manual on beep codes. What I found online coincides with what my repair manual is telling me. I did place a ticket with Asus just for verification. I started to worry there for a minute.
My System SpecsSystem Spec
.

17 Feb 2010   #4
Frostmourne

Windows 7 Ultimate x86-64
 
 

Sloppy Asus. My Gigabyte manual has a section.
My System SpecsSystem Spec
17 Feb 2010   #5
blackroseMD1

Windows 10 Tech Preview 9926 x64
 
 

Quote   Quote: Originally Posted by bassfisher6522 View Post
Theres nothing in my mobo manual on beep codes. What I found online coincides with what my repair manual is telling me. I did place a ticket with Asus just for verification. I started to worry there for a minute.
The Asus board I had in my last build did that as well. It just lets you know that everything is fine and that it's entering POST.
My System SpecsSystem Spec
17 Feb 2010   #6
stormy13
Microsoft MVP

Win 7 Ultimate x64
 
 

By no means definitive but a good reference,

PC Hell: BIOS Error Beep Codes

and usually one beep as stated already indicates all is well.
My System SpecsSystem Spec
Reply

 mobo beep code




Thread Tools




Similar help and support threads
Thread Forum
One short beep, one long beep
I was just using my PC yesterday, everything is normal, It was hot around 32 C I think. Around 3:00 P.M. my PC suffered 2 BSODS, I can't upload the .dmp files because I can't open it. I thought its just overheating so I turned it off and after a few minutes the second BSOD appeared, I restarted my...
General Discussion
beep code problem
Motherboard: Foxconn M61PML-K RAM : Kingston 2 Gig/DDR3 1333 BIOS: AMI Scenario: PC turn on but no display, but after trying some troubleshooting afterwards its getting Non Stop SHORT BEEP same as when i remove the RAM, Since i already check some beep codes for ami ive never seen...
General Discussion
Random BSOD with beep code 1 long 3 short
Hi, I keep experiencing random crashes. Due to the fact that it happens at any time I can only provide the information attached in the zip. I still hope some kind and knowledgeable soul will be able to help me out. :) 32 bit clean 3 year old install full retail 3 year old system
BSOD Help and Support
Beep, Beep wont stop
Hi, I have a acer travelmate 4070 laptop when you turn it on it starts beeping loud, I started clicking enter so it can boot quick lol as soon laptop booted, opened window went to normal screen operation it stopped beeping. I gave it a shut down, turned it on again and that loud beeping started...
General Discussion
Beep code 4-2-3-3 when ATI HD5770 inserted into Supermicro C2SBX board
Currently running a Supermicro C2SBX with fanless Gigabyte ATI HD4850 inserted. It's been running fine for two years. Dual monitors. I recently replaced my old CRT monitor with a new LCD monitor, so now I have two 24" Eizo monitors (each running at 1920x1200). Unfortunately, the HD4850 only...
Graphic Cards
No display, beep code or boot after Sleep Mode
Hi, I've seen like a million other threads for this particular problem with just about every kind of possible solution there could be. However, as no two computers can be identical, I'd give it a shot and get some help on this one. After attempting to resume Win7 from Sleep, none of my...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:03.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App