Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: when i run memtest86 i found 41 errors:(

25 Mar 2010   #11

Windows 7 Ultimate 32 bit

Glad your problem is resolved.

My System SpecsSystem Spec

 when i run memtest86 i found 41 errors:(

Thread Tools

Similar help and support threads
Thread Forum
MemTest86 Errors Questions - 72 errors recieved when running after 3hr
I was hoping that someone may be able to help me decipher what sort of error messages I encountered as a result of running MemTAest86 for a few hours. I have gotten 72 error messages, and I have no way of knowing how severe these messages are. Any help would be appreciated.
Hardware & Devices
Errors in memtest86 ? And lots of it
Hey! I started getting these BSOD's for about 3 weeks ago.... So i tried changing my harddrive.. Didnt help... So, i tried running memtest.. Well, here i got over 1 MILLION errors.. Yes, you heard me right. So, does this mean my ram is the cause for my BSOD's? Please help! Thanks in advance!
BSOD Help and Support
Think I found the bad memory stick, how to run Memtest86 to check it?
I had a bad memory stick that I was finally able to pin point I think. I have Memtest86 on a disc ready to go, how can I test this specific memory card only? Do I have to take the other 3 out & run the disk, or is there a way to run all together and I can pick which memory slot for it to...
Hardware & Devices
Bad RAM? Help Interpret Memtest86 (28,416 errors then 0 errors)
I'm really confused on whether I have bad RAM or not because of the memtest results I'm getting. I've already had to replace the mobo and graphics card in my nearly brand new built desktop as I had problems with both (mobo wasn't W7 compatible, graphics card crapped out). As I had two major...
Hardware & Devices
Memtest86 errors
I built my computer a few weeks ago and it has been experiencing many crashes BSOD. I am currently running memtest86. It is on pass 2 and has 4096 errors. The err-bits all say 00800000. I dont know what this means or what to do about it. The first time I ran memtest86 a few weeks ago it did 7...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:28.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App