Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: RAM Timings Issue

29 Mar 2010   #11
ShazaM

Microsoft Windows 7 Ultimate 64-Bit (Build 7600)
 
 

Just got a reply from Corsair. The said that the stick seems to have been mislabled and mispackaged when I bought the kit way back. They want me to send them both sticks and they will send me a replacement pair.

I was also suggested that I should just sell the XMS2s and get this Kit.

I think I'm going to RMA the bogey, get a replacement and just sell the XMS2s and buy the G.SKILLs.


My System SpecsSystem Spec
.
Reply

 RAM Timings Issue




Thread Tools




Similar help and support threads
Thread Forum
Help with RAM timings
The board I ma using is a Gigabyte GA-890FXA-UD7 and it has the old type legacy BIOS and I don't really know that much about using it because it comes up with loads of tech abbreviations that I just don't know what to do with. There are two things I would like some help with 1. in the BIOS...
Hardware & Devices
How do I set RAM Timings
Hello guys, I'm experiencing a problem with my RAM. I had Hynix 4 GB DDR3 1333 MHz CL9 and it worked fine. Recently I got Cruical 8 GB DDR3 1600 Mhz CL13 and decided to put it in another slot to see if it works. I managed to boot and computer worked fine for couple of minutes and it froze. This...
Hardware & Devices
not sure about ram timings
hi all. this is the ram im using 8Ghz 2x4 corsair CMX8GX3M2A1600C9. everywhere ive looked online says the speed is 1600 timings 9-9-9-24. but looking at my speeds n timings mine is runnin at 1066 7-7-7-20. is this just down to my mobo? should i change it and would there b any noticeable increase...
PC Custom Builds and Overclocking
Ram Timings
hey! Corsair XMS 3 1600Mhz 1.64V-currently vs stock 1.5 at 1066Mhz haven't touched the timing but it is, (9-9-9-24) i have heard as you increase the voltage it is a good idea to lower the timing for everything to keep up with the new clock/voltage also, anyone who has worked with XMS 3,...
PC Custom Builds and Overclocking
ram timings
hello all, i just completed my first build and used corsair ram with a 7-7-7-20 latency. in cpu-z it says i have a 8-8-8-20 latency. whats up with that? second question, per my hardware in my profile, would i benefit greatly to build a raid 0?
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:09.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App