Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Nikon Coolscan W7 32 bit

17 Apr 2010   #1
ajaykogs

W7 ultimate
 
 
Nikon Coolscan W7 32 bit

I have a Nikon Coolscan IV ED film scanner and the Nikon site informs that the scan is not supported under W7. Any standard ways to use this scanner with W7?


My System SpecsSystem Spec
.
18 Apr 2010   #2
not so gray matter

W7 Ult. x64 | OS X
 
 

Try using the Vista drivers, sometimes they'll work w/ no extra meddling, other times they'll work via compatibility mode.
My System SpecsSystem Spec
Reply

 Nikon Coolscan W7 32 bit




Thread Tools




Similar help and support threads
Thread Forum
Getting your Nikon Coolscan to work on W7 x64
This fix applies to the 4000, 5000, 8000, and 9000 series scanners. It also applies to Windows 8/10, but you'll need to temporally disable Windows' Driver Signature Enforcement policy (use option 1). See my post here for questions. For questions on other Nikon scanners see this post. And credit...
Drivers
nikon coolscan 5000
I have a Nikon 5000 which has been very successful in my digital imagining business, the last of our clients has had a number of slides scanned a few months ago so the scanner had sat idle. I am now wanting to sell the scanner which I have been using with XP for many years, when I ran the Nikon...
Hardware & Devices
Nikon Coolscan 5000 scanner
Has anyone tried to run this scanner under Windows 7 64 bit? The Nikon website was unclear as to whether it is compatible. Windows Compatability center lists it as compatible.
Drivers
Multiple Nikon Coolscanners on one machine
Hey, i need to know if its possible to use multiple scanners on one PC?, every time i try to open multiple copies of its software i get a message saying the driver is currently in use, or the software is currently open. thanks.
Drivers
Nikon Coolscan III and 64 bit W7
Is this possible? The Coolscan has a 50 pin SCSI-1 cable. I can't seem to find a SCSI card that will run on a 64-bit system and also take that plug. They all take Ultra 50 pin. Currently installed is the Adaptec AHA-2940 PCI, which I was using on the x86 XP system installed prior to the upgrade...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:43.
Twitter Facebook Google+