Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: How to get Canon BJC-55 IS-12 Scanner to Work

27 Sep 2011   #21

windows 7 ultimate x64

Quote   Quote: Originally Posted by Ironman1 View Post
Okay, so here is what I did:

1) Control Panel/Programs & Features/IS-12 Scan/Uninstall

2) Reinstall from Canon Website

3)Set compatibility in both CANOIT32.EXE & in ISPlus.exe to WindowsXP (Service Pack 2) under "Change settings for all users".

4) System reboot - No change

5) Set compatibility in both CANOIT32.EXE & in ISPlus.exe to WindowsXP (Service Pack 3) under "Change settings for all users".

6) System reboot - No change

This was all done with the BJC-85 powered up and connected to the tablet, IS-12 cartridge installed in the carriage. I have attached screen shots of the two dialogues boxes that come up after clicking on "Capture Image" in the program They are in the order that they appear for me. Please see below.
Which version of the Canon software ( is scan ) are you using? Also are you using the Windows update driver for the printer or did you install the old Canon driver?

My System SpecsSystem Spec
22 Jan 2012   #22

Window 7 Ultimate x64

Hello, just found this request in my e-mail and apparently it's been sitting their for awhile. I have the IS Scan Plus version 1.70 1998-2001, and am using the most recent version of the Canon software that is on their website. No, I did not install the old Canon driver that is on the disk.
My System SpecsSystem Spec
06 May 2016   #23

windows 7 ultimate 32bit

Hi, I asked for assistance to a link of where both drivers for BJC-55 and the IS-12 for windows 7, could be downloaded. Can anyone please help with this link? Thanks a million. Sorry, I use windows 7 ultimate, 64bits.
My System SpecsSystem Spec


 How to get Canon BJC-55 IS-12 Scanner to Work

Thread Tools

Similar help and support threads
Thread Forum
Driver for Canon MG6150 scanner
Hi folks, Her indoors is not happy!! I have converted her Lenovo laptop into a dual boot (XP/7 32-bit) - the intention being to get everything she uses onto 7 and "convert her" to 7 too:D In XP she has been happily using her wireless connected Canon MG6150 and was comfortable with its...
Can anyone help me get my Canon scanner working?
Hi all! I've had great help on this forum in the past but this might be a bit trickier: I am trying to get my Canon DR-2580C scanner recognised on my Windows 7 (64-bit) laptop but with no success. It worked fine on my old Windows XP computer. This is what I have done: (1) Installed what’s on...
Hardware & Devices
Canon MX850 - Anyone get network scanner to work?
I have a Canon MX850 all-in-one printer/scanner. I cannot for the life of me get networking scanning to work on Windows 7 x64 7100. Win7 detects the network printer, but for whatever reason I can't get the scanning to work over network. If anyone has some good instructions for setting this up, let...
Hardware & Devices
Canon Scanner
Hi All - upgraded to an Intel i5 2400 CPU with ASRock P67 PRO motherboard. Everything went well, Windows found everything and installed the drivers fine apart from one. In the System there is a Canon LIDE scanner which shows as a CanoScan with the yellow exclamation mark. Also Devices and...
Hardware & Devices
Canon D646U scanner works
Hi *, FYI, Canoscan D646U scanner is compatible with Windows 7. Just use the XP drivers (Ver. 6.0.2b) to install it. I tested it on Windows 7 Ultimate and it works like a charm! Good luck!

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 08:59.
Twitter Facebook Google+