Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Is this possibly my scanner?

29 May 2010   #1
steve-pressman

Windows 7 Ultimate 64 - OEM Service Pack 1
 
 
Is this possibly my scanner?

Everything is running fine in the rig I was just doing some weekly checks and I noticed this in the hardware section that I have highlighted. Nothing is not working except the scanner which will not work under WIN 7 - 64. Could that be the possibly what i am seeing ?


Steve




Attached Images
Is this possibly my scanner?-possibly-scanner.png 
My System SpecsSystem Spec
.
30 May 2010   #2
bobkn

Windows 7 Pro X64 SP1
 
 

Hard to say. Why not unplug it (USB), uninstall the unknown device from Device Manager, and see what happens when you plug it in again?

If you're looking for a third-party solution to allow it to work under Win7 X64, this may be worthy of a try:

Canon 8000F Scanner Driver and Software

I'm not sure that it's worthwhile, unless the scanner is a particularly good one. However, you can test it for free.
My System SpecsSystem Spec
30 May 2010   #3
Adrian

 
Device Manager

I see mine in imaging devices in the device manager.
My System SpecsSystem Spec
.

30 May 2010   #4
Bill2

Windows 7 x64 pro/ Windows 7 x86 Pro/ XP SP3 x86
 
 

Get the PCI Vendor number and PCI Device numbers from Device Manager. Go to Device Manager –> Right click the unknown device –> Properties –> Details. Now from the drop down menu select Device Instance Path/ Device Instance ID.

It will give you a string value which contains the vendor ID and the Device ID. The string is like this:
HDAUDIOFUNC_02&VEN_14F1&DEV_5045&SUBSYS_103C30D5&REV_10014&2675E3A&0&0002
Where red is the Vendor ID and green is the Device ID. Note down both of them and use the following web sites to track them down.

PCI Vendor and Device Lists

The PCI ID Repository
My System SpecsSystem Spec
30 May 2010   #5
thefabe

Windows 7 ultimate 64 bit / XP Home sp3
 
 

You can also basicaly do the same thing and find the hardware id of the highlighted item by going to device manager>right click on device>properties>details tab>drop down menu>select first one "hardware id">Copy and Paste the hardware id string and we can find out the device from the hardware id string. As posted above is what it will resemble.Their may be several strings. I just find this way a little easier for some people. Not tryin to step on your toes Bill2 Fabe
My System SpecsSystem Spec
31 May 2010   #6
steve-pressman

Windows 7 Ultimate 64 - OEM Service Pack 1
 
 

Quote   Quote: Originally Posted by bobkn View Post
Hard to say. Why not unplug it (USB), uninstall the unknown device from Device Manager, and see what happens when you plug it in again?

If you're looking for a third-party solution to allow it to work under Win7 X64, this may be worthy of a try:

Canon 8000F Scanner Driver and Software

I'm not sure that it's worthwhile, unless the scanner is a particularly good one. However, you can test it for free.

I unplugged the scanner and did a refresh of the hardware and it is the scanner. Thanks for the tip now why did I not think of doing that ??? HA HA Must have been having a blond day
My System SpecsSystem Spec
Reply

 Is this possibly my scanner?




Thread Tools




Similar help and support threads
Thread Forum
cheapest SSD possibly available?
Cheapest smallest (in gb) that can fit a windows 7 on it? i dont care for power savings or features or anything fancy smancy just whatever the cheapest smallest drive available is?
Hardware & Devices
Possibly bad HDD motor?
Recently whenever I bring the computer out of sleep mode or restart it after a proper shut down one of the HDD gives off this creepy noise the kind when a motor is strained it lasts for a short second while the HDD spins up but it stops. Otherwise the HDDs themselves are fine no clicking, can run...
Hardware & Devices
Possibly corrupt O/S after replacement of HD
I am out of my depth. (If my BSOD didn't work, I would never know, because I have no idea what it is. I am an old innocent.) The hard drive in my Acer Aspire laptop failed. The dealer installed a new one, and I then reinstalled everything from the DVDs of the system which I had made immediately...
General Discussion
Will it possibly work?
I am planning on buying a new graphics card.. SadlyI believe it says 300 watt psu but im 250 and my cpu pulls like 95W but i heard this will work PC experts please? I only got like 73 $? D: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=465472&CatId=3669
Hardware & Devices
BSOD, possibly memory?
Long story short, i've been getting BSOD's for a while and originally thought it was down to a dodgy stick of ram (Ballistix PC2-5300 BL2KIT12864AA663.8FE4) which didn't like running at the correct timings (3-3-3-12 @ 2.1/2.2v). Pulled this and the system seemed to be ok. But recently i've been...
BSOD Help and Support
Is it possibly to modify my M11X?
Hey guys, Recently i bought my alienware m11x, and im pretty satisfied with it. But i do think it misses that last bit of performence, and i was wandering is it possibly to put different hardware into my alienware m11x? (laptop). Peace, SilentSunday
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:15.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App