Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: GA-EP45-UD3P mother board problem

04 Jun 2010   #1
FCVPI99

Windows 7 Ultimate 64 bit
 
 
GA-EP45-UD3P mother board problem

ok guys i have a GA-EP45-UD3P its a great board when i star the computer there are 6 LED lights (phase LED) on the board that light up as soon as windows boots they turn off is there any type of driver that will make these work in win7 64??


My System SpecsSystem Spec
.
04 Jun 2010   #2
A Guy

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1
 
 

You have to have the Dynamic Energy Saver software running. The phase leds monitor the 6 phase power usage. Has nothing to do with the OS.

DES

A Guy
My System SpecsSystem Spec
05 Jun 2010   #3
FCVPI99

Windows 7 Ultimate 64 bit
 
 

ahh ok when i first got the computer up and running energy saver would BSOD windows after running only 2-5 seconds
i hope they fixed it
My System SpecsSystem Spec
.

05 Jun 2010   #4
A Guy

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1
 
 

Now that's a completely different thread, lol. See if you have the latest BIOS version. If you do, they do have forums you can search or ask if others have that specific issue. A Guy
My System SpecsSystem Spec
Reply

 GA-EP45-UD3P mother board problem




Thread Tools




Similar help and support threads
Thread Forum
New Cisco SG200-08 Switch/Gigabyte EP45-UD3P/Realtek 81xx NIC TEAMING
I just received my new Cisco SG200-08 GB Managed Switch yesterday! Requirements were future proofing my network with IPv6, POE, VOIP, VPN,... Actually this thing has too many features... for now! Awesome switch @ $117!!! Newegg.com - Cisco Small Business SLM2008T-NA 10/100/1000Mbps SG200-08 8-Port...
Network & Sharing
M/B Gigabyte--GA-EP45-UD3P Rev 1
I want to install MS7 on new h/d.I was thinking of --- Toshiba 2TB Internal Serial ATA III Hard Drive for Desktops --.I will be getting hew desktop in 6-9 months and will use this h/d.The sepc say--2x sata 3gb/s connectors (gsata2_0,gsata2_1) supporting up to 2 sata 3gb/s devices.Would this new...
Hardware & Devices
GA-EP45-UD3P Rev 1.6 bios update to FC problem
To start i'd like to just say how much i hate this board and how i'll never buy another Gigabyte again. First I had problems with getting my memory stable with my mobo (solved by following a guide by gskill rep). then i keep having problems with random crashes in games and couldn't find a...
Hardware & Devices
GBB36X drivers on Gigabyte EP45-UD3P
I have a Gigabyte GA-EP45-UD3P I'm working on. I have an E-SATA bracket hooked to two ports run by a separate controller for the other SATA ports. I "think" the ports are JMicron controlled, but all it says is "Gigabyte GBB36X" I have the motherboard disk and the driver on it seems to be having...
Drivers
Gigabyte EP45-UD3P Audigy No Sound in Windows 7 (64-bit
Hi, I just installed windows 7 64bit. I have a sound blaster audigy as installed the latest drivers from creative (SBAX_PCDRV_LB_2_18_0011.exe). I get no sound out of the card at all. Device manager shows the device is working correctly. I have also picked it as the default in the sound...
Sound & Audio
Driver for AHCI Gigabyte EP45-UD3P
I have been reading for days and don't understand this. When I get a system built using all SATA drives...is the best setting in the bios AHCI? I know the RAID setting requires drivers and IDE does not but how about AHCI? Should I even use this setting? Does it require drivers or does W7 have...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 20:01.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App