GA-EP45-UD3P mother board problem


  1. FCVPI99
    Posts : 153
    Windows 7 Ultimate 64 bit
       New #1

    GA-EP45-UD3P mother board problem


    ok guys i have a GA-EP45-UD3P its a great board when i star the computer there are 6 LED lights (phase LED) on the board that light up as soon as windows boots they turn off is there any type of driver that will make these work in win7 64??
      My Computer
    Quote Quote

  3. A Guy
    Posts : 53,363
    Windows 10 Home x64
       New #2

    You have to have the Dynamic Energy Saver software running. The phase leds monitor the 6 phase power usage. Has nothing to do with the OS.

    DES

    A Guy
      My Computer
    Quote Quote

  4. FCVPI99
    Posts : 153
    Windows 7 Ultimate 64 bit
    Thread Starter
       New #3

    ahh ok when i first got the computer up and running energy saver would BSOD windows after running only 2-5 seconds
    i hope they fixed it
      My Computer
    Quote Quote

  6. A Guy
    Posts : 53,363
    Windows 10 Home x64
       New #4

    Now that's a completely different thread, lol. See if you have the latest BIOS version. If you do, they do have forums you can search or ask if others have that specific issue. A Guy
      My Computer
    Quote Quote

 

  Related Discussions
M/B Gigabyte--GA-EP45-UD3P Rev 1
in Hardware & Devices

I want to install MS7 on new h/d.I was thinking of --- Toshiba 2TB Internal Serial ATA III Hard Drive for Desktops --.I will be getting hew desktop in 6-9 months and will use this h/d.The sepc say--2x sata 3gb/s connectors (gsata2_0,gsata2_1) supporting up to 2 sata 3gb/s devices.Would this new...
To start i'd like to just say how much i hate this board and how i'll never buy another Gigabyte again. First I had problems with getting my memory stable with my mobo (solved by following a guide by gskill rep). then i keep having problems with random crashes in games and couldn't find a...
I have a Gigabyte GA-EP45-UD3P I'm working on. I have an E-SATA bracket hooked to two ports run by a separate controller for the other SATA ports. I "think" the ports are JMicron controlled, but all it says is "Gigabyte GBB36X" I have the motherboard disk and the driver on it seems to be having...
Hi, I just installed windows 7 64bit. I have a sound blaster audigy as installed the latest drivers from creative (SBAX_PCDRV_LB_2_18_0011.exe). I get no sound out of the card at all. Device manager shows the device is working correctly. I have also picked it as the default in the sound...
I have been reading for days and don't understand this. When I get a system built using all SATA drives...is the best setting in the bios AHCI? I know the RAID setting requires drivers and IDE does not but how about AHCI? Should I even use this setting? Does it require drivers or does W7 have...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 19:37.
Find Us