Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: XBCD drivers for Xbox 360 gamepad

13 Jun 2010   #91
squall leonhart

Windows 7
 
 

i expect you are missing a character set that the tool depends on.


My System SpecsSystem Spec
.
13 Jun 2010   #92
marcus2976

Windows 7 Ultimate x64
 
 
Afterglow Controller Xbox 360 use on Pc

I aint having no luck getting this to work i have followed everything to the "T" and i am having no luck at freakin all can someone please help me out I have a Afterglow AX.1 Wired controller for Xbox 360 wanting to use it on my pc so I can play Alpha Protocol and Prince of Persia The Forgotten Sands also.



This it what it shows in the Device Manager:

The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.

To find a driver for this device, click Update Driver.
My System SpecsSystem Spec
14 Jun 2010   #93
RevoCHX

Windows 7
 
 

Hi leonhart,

I have a little question... I'm willing to reduce the sensitivity of an axis. I can do it if I modify the "scaling" in my XBCD profile (from 100 to 85 for example), but then I won't be able to steer at 100% (it's for a racing game).

I checked the ingame options, and I can only set a higher sensitivity there, that's why I would like to do it through XBCD.

Any ideas ?
Thanks,
Revo
My System SpecsSystem Spec
.

14 Jun 2010   #94
squall leonhart

Windows 7
 
 

Range is not the same as sensitivity

infact reducing the range increases the sensitivity when the control is recalibrated for the new range.
My System SpecsSystem Spec
14 Jun 2010   #95
squall leonhart

Windows 7
 
 

Quote   Quote: Originally Posted by marcus2976 View Post
I aint having no luck getting this to work i have followed everything to the "T" and i am having no luck at freakin all can someone please help me out I have a Afterglow AX.1 Wired controller for Xbox 360 wanting to use it on my pc so I can play Alpha Protocol and Prince of Persia The Forgotten Sands also.



This it what it shows in the Device Manager:

The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.

To find a driver for this device, click Update Driver.
That control is not supported, i need the PID and VID numbers to add it.
My System SpecsSystem Spec
15 Jun 2010   #96
marcus2976

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by squall leonhart View Post
Quote   Quote: Originally Posted by marcus2976 View Post
I aint having no luck getting this to work i have followed everything to the "T" and i am having no luck at freakin all can someone please help me out I have a Afterglow AX.1 Wired controller for Xbox 360 wanting to use it on my pc so I can play Alpha Protocol and Prince of Persia The Forgotten Sands also.



This it what it shows in the Device Manager:

The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.

To find a driver for this device, click Update Driver.
That control is not supported, i need the PID and VID numbers to add it.

Here are the numbers that you asked for :

USB\VID_1BAD&PID_F900&REV_0100
USB\VID_1BAD&PID_F900
That is the numbers that are under the hardware Id list i hope that this might help in any way Thanks
My System SpecsSystem Spec
15 Jun 2010   #97
squall leonhart

Windows 7
 
 

ok, file updated. same links
My System SpecsSystem Spec
16 Jun 2010   #98
bgbfflochp

Windows 7 Home Premium
 
 

Hey, I'm the one a few posts up that was having the problem with the game's configuration showing ??????'s everywhere. I uninstalled/reinstalled the software and it looks correct now. I ran ffxiconfig and enabled gamepad/assigned the buttons. When I test the gamepad, the buttons work perfectly, including the triggers. However, my analog sticks aren't working correctly.

When I click the movement tab for its assignment, it gives me one of those "Hold the directional control device in the <UP> direction and press button 1." kind of deals until I've done all of the directions. So I went through the steps with my left analog stick. Then I did the same thing with the right analog stick for the Camera. I finished with Menus and using the control pad.

When I test the gamepad, all 3 (movement box, camera box, menu box) move with the left analog stick, and none of them are even close to being correct. Do you have any ideas on what might be going on? I move the right analog stick and none of the boxes have movement.


I hope this makes sense to you and thanks again for all your help.
My System SpecsSystem Spec
17 Jun 2010   #99
Kaeno

Win 7 Home Premium 64bit 7600
 
 

Not sure if this will help you bgbffloch.

maybe, Go to control panel and under your xbox controller, try recalibrating it.
bgbffloch
My System SpecsSystem Spec
17 Jun 2010   #100
Kaeno

Win 7 Home Premium 64bit 7600
 
 

Decided to go with out Xbox 360 controller. got Logitech rumble pad 2 instead.
My System SpecsSystem Spec
Reply

 XBCD drivers for Xbox 360 gamepad




Thread Tools




Similar help and support threads
Thread Forum
My gamepad detected as Generic Usb Joystick, Not as USB Gamepad.
I bought Enter E-GPV10 Controller for PC. Usually gamepads connected to my laptop would be shown as USB Gamepad. But not this one. My games such as Ashes Cricket, Portal2, COD MW ignore this gamepad even when connected. Device Manager shows 'Human Interface devices' with two drivers 1. HID...
Hardware & Devices
XBOX S Gamepad: working signed driver
After a new install of Windows 7 on my new PC I was about to reinstall the unsigned XBCD 0.2.7 drivers for my old XBOX S gamepad when I decided to search the web a bit and found this entry: HowTo get the Xbox Controller S working in Windows 7 (64-Bit) Pictures and Code According to that...
Gaming
xbcd xbox controller windows 7
NOT 360 controllers. I was able to run xbox (NON 360) controllers with xbcd.dll drivers. in windows xp. they do not seem to take effect with windows 7. X_x.... Anyone know what I need to do ?
Gaming
Xbox 360 GamePad wired/wired PC version difference?
Could anybody here tell me if there is a difference between the standard wired Xbox 360 control and the one labelled as being for both PC and Xbox 360, just the prices are slightly different? Here are the two I mention: Standard Xbox 360 Wired Wired Gamepad - Black (Xbox 360): Amazon.co.uk:...
Gaming
Problems with signatures in the gamepad drivers
I have an acteck AGJ 3350 gamepad. Lost the disk so I just dowloaded the drivers from the companies website and win7 doesn't recognize them and recalls the pad as a troubled hardware.
Drivers
Standard gamepad driver for Gravis Gamepad Pro USB?
Hi, I've got a Gravis Gamepad Pro USB and although a device is detected when I plug it in, it fails to install a driver. I can't find any Windows 7 x86 drivers on the net so I believe that I have to use some kind of standard HID driver to get it working, although I'm not sure which one. When...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:16.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App