Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: XBCD drivers for Xbox 360 gamepad

28 Nov 2009   #11
matt_0978

Windows 7 Ultimate 64Bit
 
 

yes, that's why when u run dseo tool there's an option to remove watermark.


My System SpecsSystem Spec
.
14 Dec 2009   #12
squall leonhart

Windows 7
 
 

Bad news.... a slight oversight has rendered xbcd's rumble incompatible with x64 apps. the rumble driver is not x64 compatible at this time, and im not exactly code savvy enough to correct this.
My System SpecsSystem Spec
01 Jan 2010   #13
Zorlac

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by Mika View Post
Many Thanks for this solution.
In "TEST MODE" it's ok.
Must we stay in the "TEST MODE" after?
Because when i return on the "Normal Mode" My XBOX controller don't appear.

Sorry for my bad english, i'm french...
Thank you.
Yes, unfortunately you must be test mode for the driver to work.

Also I fixed my last post. The driver is located in system32/drivers. I just installed Home Premium 64bit and this method works great for retail builds of W7. Huge thanks for Squall and all those involved in keeping XBCD alive!
My System SpecsSystem Spec
.

03 Jan 2010   #14
ely

Windows 7 (64-Bit)
 
 

I'm not having much joy with this.

I followed the instructions on page one of this thread, turned off UAC and yet still the XBCD Driver doesn't show itself when I try to Update the drivers.

I can't see I've missed anything but is there any way I can check the XBCD.sys file is correctly setup now? Or anything else I can try?

ANy help greatly appreciated.
My System SpecsSystem Spec
03 Jan 2010   #15
squall leonhart

Windows 7
 
 

Quote   Quote: Originally Posted by ely View Post
I'm not having much joy with this.

I followed the instructions on page one of this thread, turned off UAC and yet still the XBCD Driver doesn't show itself when I try to Update the drivers.

I can't see I've missed anything but is there any way I can check the XBCD.sys file is correctly setup now? Or anything else I can try?

ANy help greatly appreciated.
There is no need to disable UAC.
as long as Test signing is off, and the file is signed(for Vista/7 x64), it is simply a matter of doing an update install.

Post a screenshot of the device you are trying to update in device manager.
It is probably a 360 type control that is not yet supported in the drivers installation script.
My System SpecsSystem Spec
03 Jan 2010   #16
ely

Windows 7 (64-Bit)
 
 

Ah hang on, you mean I need to turn Test Mode back off again once I've Signed the .sys file? That's not the way the intructions read. I'll go and try that then! The device BTW is the 360 EX2 Fighter Stick that was release for Virtua Fighter 5 I think. I will be using a standard wired 360 Pad as well, but that's still plugged in my working XP machine.
My System SpecsSystem Spec
03 Jan 2010   #17
squall leonhart

Windows 7
 
 

Typo, test signing must be on.
The current version doesn't have support for the EX2 Fighter stick, but if you get the PID/VID values from the Details tab in device manager > device properties, i can add that in a jiffy.
My System SpecsSystem Spec
03 Jan 2010   #18
ely

Windows 7 (64-Bit)
 
 

Ah thanks for that, saved me spending longer trying to figure out why it's not working

Here's the Device Manager Hardware IDs section, if you need anything else just let me know;

My System SpecsSystem Spec
03 Jan 2010   #19
squall leonhart

Windows 7
 
 

My System SpecsSystem Spec
03 Jan 2010   #20
ely

Windows 7 (64-Bit)
 
 

That's done it mate, thanks very much indeed
My System SpecsSystem Spec
Reply

 XBCD drivers for Xbox 360 gamepad




Thread Tools




Similar help and support threads
Thread Forum
My gamepad detected as Generic Usb Joystick, Not as USB Gamepad.
I bought Enter E-GPV10 Controller for PC. Usually gamepads connected to my laptop would be shown as USB Gamepad. But not this one. My games such as Ashes Cricket, Portal2, COD MW ignore this gamepad even when connected. Device Manager shows 'Human Interface devices' with two drivers 1. HID...
Hardware & Devices
XBOX S Gamepad: working signed driver
After a new install of Windows 7 on my new PC I was about to reinstall the unsigned XBCD 0.2.7 drivers for my old XBOX S gamepad when I decided to search the web a bit and found this entry: HowTo get the Xbox Controller S working in Windows 7 (64-Bit) » Pictures and Code According to that...
Gaming
xbcd xbox controller windows 7
NOT 360 controllers. I was able to run xbox (NON 360) controllers with xbcd.dll drivers. in windows xp. they do not seem to take effect with windows 7. X_x.... Anyone know what I need to do ?
Gaming
Xbox 360 GamePad wired/wired PC version difference?
Could anybody here tell me if there is a difference between the standard wired Xbox 360 control and the one labelled as being for both PC and Xbox 360, just the prices are slightly different? Here are the two I mention: Standard Xbox 360 Wired Wired Gamepad - Black (Xbox 360): Amazon.co.uk:...
Gaming
Problems with signatures in the gamepad drivers
I have an acteck AGJ 3350 gamepad. Lost the disk so I just dowloaded the drivers from the companies website and win7 doesn't recognize them and recalls the pad as a troubled hardware.
Drivers
Standard gamepad driver for Gravis Gamepad Pro USB?
Hi, I've got a Gravis Gamepad Pro USB and although a device is detected when I plug it in, it fails to install a driver. I can't find any Windows 7 x86 drivers on the net so I believe that I have to use some kind of standard HID driver to get it working, although I'm not sure which one. When...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 22:18.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App